2009 Mercedes-Benz CL65 AMG by VATH

Article by Christian Andrei, on August 27, 2010

New details about the version that Mercedes-Benz tuners Vath made of the CL 65 AMG have been released. The German tuners claim that the car is equipped with 745hp and up to 1,150 Nm of torque, making it capable of accelerating from zero to 100km/h in almost four seconds.

Priced at EUR36,890, the engine tuning package boasts of having reprogrammed computer, "inlet optimization with an air collector," and an advanced cooling system.

In addition, the car has a new exhaust and a "boosting" system. With this package, the car can hit a top speed of 340 km/h (211 mph).

If you want 20-inch alloys with Vredestein high-performance winter tires that would cost an additional EUR7,378. Opting for six-piston caliper brakes with 405 mm disks also would also cost you considerably more.

For EUR8,082, you get calipers, disks, and steel-flex tubes with racing fluid. Lowering the vehicle 40 mm costs another EUR1,952.

To liven up the exterior, you can get carbon front lip and rear fins. The fins replace the diffusor, with the trunk and roof spoilers sitting above.

This brings the exterior modifications for the Vath CL 65 AMG to cost a total of EUR3,188.

If you liked the article, share on:

Comments

Login or Create new account to add a comment!

Recommended

A custom-made Jeep Wrangler wearing Center Line’s RT1X wheels was seen recently in the Lucas Oil offroad Expo in Pomono, California. In this event, Starwood Motors enticed their audience with...
by - December 5, 2016
Have you come across a Ferrari 488 Spider with ADV05 M.V2 Custom Spec wheels? Well, the most attractive Ferrari here on earth, or should we say in South Korea has...
by - December 4, 2016
Sweet and impressive. This is how we could describe the Chevrolet Corvette Z06. As a world-class supercar, the Corvette Z06 is conceived on the track and is engineered to achieve...
by - December 2, 2016
For those who already own a high capable car, changes are often unnecessary. However it appears that for Carbonfiber Dynamics (CFD), there will always be room for improvement especially with...
by - December 2, 2016
German-based company Wheelsandmore has always been known for its utmost focus on wheels. Yes, WheelsandMore could heavily customize wheels to the needs of its customers. However, as its name aptly...
by - December 1, 2016
Facebook

Youtube Channel

Tip Us
Do you have a tip for us?
Did you film an important event?
Contact us
Newsletter
Subscribe to our newsletter!
Subscribe
Galleries