2012 Mercedes-Benz SLK by Brabus

Article by Christian Andrei, on August 4, 2011

Brabus has unveiled its new Sport package for the new Mercedes-Benz SLK R172, featuring various parts that range from the expected multi-spoke wheels to exhausts and even to its interior trim. Brabus installed an aero kit with two front spoiler lips that are placed on the left and right side of the production apron.

The front also gets a new LED bar configuration, the side has new sills, while at the back there’s a new diffuser and boot spoiler.

The SLK was given a set of Brabus Monoblock wheels, available in sizes ranging from 17 to 20 inches, and offered as either a one piece or multi-piece design. Brabus suggests a set of high-performance tires from Continental, Pirelli or YOKOHAMA that’s sized 235/30 ZR20 on the front axle and 275/25 ZR20 at the rear.

The ride height could be lowered by 30 millimeters by fitting it with sport springs that work with Mercedes’ shocks. Its high-performance brakes are offered in numerous configurations too.

Consumers may opt for the engine upgrades. The BRABUS ECO PowerXtra B20 CGI performance kit boosts the performance of the SLK 200 BlueEFFICIENCY with an additional 26hp. Meanwhile, the 250 is available with either 230hp rather than the stock 204, or 240hp. We don’t know yet what improvements were done to the SLK 350 but the anticipation among the fans is high.

Powertrain

To preserve engine fatigue resilience and increase its longevity, the performance-enhancing mapping feature of these kits is designed to activate only when all factors are within acceptable limits (i.e. engine temperature is in the green). This preserves engine serviceability and reduces the impact of the wear and tear caused by feature activation.

With the Brabus ECO PowerXtra B20 CGI performance kit installed, the SLK 200 BlueEFFICIENCY’s four-cylinder direct-injection engine increases power output by 26hp (25bhp) / 19 kW and peak torque by 30 Nm (22 lb-ft.).

A two-stage upgrade can be done for the new SLK 250 BlueEFFICIENCY. The Brabus ECO PowerXtra B25 CGI module boosts the four-cylinder direct-injection engine’s power from 204hp (201bhp) / 150 kW to 230hp (226bhp)/169 kW at 5,500 rpm.

An extra 10hp can be added when a larger intercooler and the electronically controlled Brabus sport wastegate valve are installed. These are components of the Brabus ECO PowerXtra B25S CGI performance kit. With overboost activation, 240hp (236bhp)/176 kW of power and 370 Nm (273 lb-ft.) of torque result in a 0-100 km/h acceleration time of 6.2 seconds as it reaches a maximum speed of 248 km/h (154 mph).

All Brabus-tuned CGI engines are road-tested to provide outstanding driving performance, enhanced pulling power from low engine speeds and excellent fuel efficiency. The Brabus engine tuners also focused just as much on lowering emissions, such that all engines installed with the Brabus ECO PowerXtra CGI performance kit pass stringent Euro V emission standards, just as their equivalent non-tuned engines do.

The Brabus stainless-steel exhaust system also benefits tuned engines. When installed, its four tailpipes designed in signature Brabus style enhances the roadster’s luxurious appeal and provides all engine variants with a sportier exhaust note.

Press Release

Mercedes-Benz SLK Brabus

A sporty designer suit, custom-tailored wheels with diameters of up to 20 inches complete with corresponding suspension options, performance tuning for all engines and exclusive interior design: Brabus now offers an extensive customization program for the new Mercedes SLK.

Sporty-elegant Brabus aerodynamic-enhancement components give the roadster an even more thrilling appearance. The two Brabus front spoiler lips that attach on the left and right side of the production apron and the striking bezels for the daytime running lights lend the SLK a more striking nose. But that's not all: the spoilers also reduce lift on the front axle which particularly benefits directional stability at high speeds.

The Brabus side sill attachments emphasize the sporty lateral lines of the car and seem to make the rear fenders wider visually. The rear of the car receives some added sporty character with the Brabus diffuser and the Brabus rear spoiler on the trunk lid. The diffuser is integrated with utmost precision into the production bumper and features a centrally mounted rear reflector. These aerodynamic-enhancement components also serve more than just a visual function; they reduce lift in the rear as well.

A major contribution to the sporty appearance of the new SLK from Bottrop likewise comes from the Brabus Monoblock wheels, which are available in various one-piece or multi-piece designs with diameters ranging from 17 to 20 inches.

The attached photos show the roadster equipped with Brabus Monoblock F wheels painted the new exclusive 'Liquid Titanium' color. They are mounted in size 8.5Jx20 in front and in size 9.5Jx20 on the rear axle. Brabus recommends high-performance tires from Continental, Pirelli or Yokohams in sizes 235/30 ZR 20 on the front axle and 275/25 ZR 20 in back.

Brabus sport springs were custom-developed to match the conversion to these king-sized tires. They are calibrated to work with the production shocks, and lower the ride height of the two-seater by some 30 millimeters (1.2 inches). Brabus also offers various versions of its high-performance brake systems for the new SLK.

These measures furthermore make the new SLK perfectly suited for some extra power. In a first step Brabus offers efficient and reasonably priced Brabus ECO PowerXtra CGI tuning for the four-cylinder direct-injection engines. The processor-controlled Brabus ECO PowerXtra CGI auxiliary control modules are custom-tailored to each respective engine variant and can be installed by any authorized Mercedes-Benz dealer in less than an hour thanks to their 'plug and play' design. All performance kits are backed by the one-of-a-kind Brabus Tuning Warranty® of three years, up to 100,000 kilometers / 62,000 miles (updated November 2006). Brabus recommends Aral high-performance lubricants.

To retain the engine's longevity and fatigue strength these kits are designed to only activate the performance-enhancing mapping when all parameters such as engine temperature etc. are in the green. This effectively prevents the performance increase from negatively affecting the service life of the engine.

After the installation of the Brabus ECO PowerXtra B20 CGI performance kit the four-cylinder direct-injection engine of the SLK 200 BlueEFFICIENCY produces an extra 26 hp (25 bhp) / 19 kW of power and an additional 30 Nm (22 lb-ft) of peak torque.

The new SLK 250 BlueEFFICIENCY can be upgraded at Brabus in two stages. The Brabus ECO PowerXtra B25 CGI module bumps power output of the four-cylinder direct-injection engine from standard 204 hp (201 bhp) / 150 kW to 230 hp (226 bhp) / 169 kW at just 5,500 rpm.

Another ten additional horsepower can be realized with the supplementary installation of a larger intercooler and an electronically controlled Brabus sport wastegate valve that are part of the Brabus ECO PowerXtra B25S CGI performance kit. 240 hp (236 bhp) / 176 kW of power and 370 Nm (273 lb-ft) of torque in overboost mode accelerate the two-seater in 6.2 seconds from rest to 100 km/h on the way to a top speed of 248 km/h (154 mph).

On the road all CGI engines performance-tuned by Brabus deliver not just excellent driving performance but also optimized pulling power from low engine speeds and favorable fuel economy. Just as important for the Brabus engine specialists were exemplary low emissions: like the corresponding non-tuned engines all engines with Brabus ECO PowerXtra CGI performance kit meet strict Euro V emission limits.

The installation of the Brabus stainless-steel sport exhaust system is advantageous not only for tuned engines. Its four tailpipes featuring the typical Brabus design not only give the roadster an even more exclusive appearance but also produce an even sportier exhaust note for all engine variants.

Another focus of the Brabus refinement of the new Mercedes SLK is the interior. Brabus offers an extensive program for the roadster: it includes attractive accessories such as high-gloss polished stainless-steel scuff plates with Brabus logo and sporty elements such as aluminum foot pedals and shifter.

Requests for even more individuality can be fulfilled by the Brabus upholstery shop in the form of exclusive interiors crafted from especially soft and breathable Brabus Mastik leather and Alcantara.

If you liked the article, share on:

Comments

Login or Create new account to add a comment!

Recommended

Have you come across a Ferrari 488 Spider with ADV05 M.V2 Custom Spec wheels? Well, the most attractive Ferrari here on earth, or should we say in South Korea has...
by - December 4, 2016
Sweet and impressive. This is how we could describe the Chevrolet Corvette Z06. As a world-class supercar, the Corvette Z06 is conceived on the track and is engineered to achieve...
by - December 2, 2016
For those who already own a high capable car, changes are often unnecessary. However it appears that for Carbonfiber Dynamics (CFD), there will always be room for improvement especially with...
by - December 2, 2016
German-based company Wheelsandmore has always been known for its utmost focus on wheels. Yes, WheelsandMore could heavily customize wheels to the needs of its customers. However, as its name aptly...
by - December 1, 2016
Techart has long been known for presenting a Porsche Cayenne Turbo S-based Magnum during the Essen Motor Show. Its bold campaign has not wavered for the 2016 show as the...
by - November 30, 2016
Facebook

Youtube Channel

Tip Us
Do you have a tip for us?
Did you film an important event?
Contact us
Newsletter
Subscribe to our newsletter!
Subscribe
Galleries