DMC Velocita Wind Edition based on McLaren MP4-12C

Article by Christian Andrei, on September 1, 2014

McLaren already replaced the MP4-12C with the all-new 650S but for those who own one, DMC revealed the Velocita Wind Edition. Set to take the MP4-12C to a new level, the new Velocita Wind Edition you see in the photos is actually owned by a Saudi Arabian and was spotted on the French Riviera.

As you can see, the vehicle is heavily modified and comes with a new front bumper with new canards, a front lip spoiler, new side skirts, a new rear spoiler as well as a new rear air diffuser. Moreover, there is a new titanium exhaust system.

The new customization programme takes its name from the new roof-mounted scoop and from the new rear wing. For those who don’t know, the standard McLaren MP4-12C is powered by a 3.8-liter twin-turbo V8 engine that generates 616 hp and can push the vehicle from 0 to 100 km/h (62 mph) in 3.1 seconds and to 200 km/h (200 mph) in 8.8 seconds.

300 km/h (186 mph) is achieved in 26.5 seconds, while top speed is limited to 207 mph or 333 km/h. DMC also improved the engine and power was increased to 660 hp and 680 Nm (502 lb-ft) of torque. There are no details about the performances of the updated car or the pricing!

If you liked the article, share on:

Comments

Login or Create new account to add a comment!

Recommended

A custom-made Jeep Wrangler wearing Center Line’s RT1X wheels was seen recently in the Lucas Oil offroad Expo in Pomono, California. In this event, Starwood Motors enticed their audience with...
by - December 5, 2016
Have you come across a Ferrari 488 Spider with ADV05 M.V2 Custom Spec wheels? Well, the most attractive Ferrari here on earth, or should we say in South Korea has...
by - December 4, 2016
Sweet and impressive. This is how we could describe the Chevrolet Corvette Z06. As a world-class supercar, the Corvette Z06 is conceived on the track and is engineered to achieve...
by - December 2, 2016
For those who already own a high capable car, changes are often unnecessary. However it appears that for Carbonfiber Dynamics (CFD), there will always be room for improvement especially with...
by - December 2, 2016
German-based company Wheelsandmore has always been known for its utmost focus on wheels. Yes, WheelsandMore could heavily customize wheels to the needs of its customers. However, as its name aptly...
by - December 1, 2016
Facebook

Youtube Channel

Tip Us
Do you have a tip for us?
Did you film an important event?
Contact us
Newsletter
Subscribe to our newsletter!
Subscribe
Galleries