List of News and Information about gt and rendering on 4WheelsNews.com
News and Information about gt and rendering
Read the latest news and information about gt and rendering published on 4WheelsNews.com! View comments and pictures about gt and rendering on 4WheelsNews.com!
Just a month ago, Audi unveiled one of its latest studies -- the new Audi Aicon Concept car -- at the 2017 Frankfurt Motor Show to show how the carmaker visualizes the future of autonomous vehicles. That concept looked so promising, especially when we take into consideration that it was supposed to be a fully self-driving luxury vehicle in which a ferried passenger just has to sit back, relax and wait for his or her arrival at a preset destination.
Now, here comes the Audi Atom, a concept that also visualizes the future. It looks so promising that it appears like it was a preview for the Audi R8 of the future. There is one big exception, though. This Atom isn’t from Audi. In fact, Audi didn’t even design this Atom. Actually, this Audi Concept Atom is a rendering created by a Russian graphic artist named Konstantin Pankratov who shared this work on online professional sharing site Behance.
Sadly though, Pankratov didn’t provide any detail or description of the Audi Concept Atom. However, we could make assumptions just by looking at this rendered creation. The appearance of this Audi Atom is definitely assertive. However, it isn’t aggressive enough to be regarded as a supercar or a hypercar. Usually, design studies or concept are heavily aggressive and boasts of extra-dramatic designs. If this Audi Atom previews a future Audi hypercar, it should have very forceful appearance. But as we said, this Atom doesn’t have that particular look.Read the entire article Audi Atom Concept rendering seems to preview a future GT
Not many may be familiar with the Dacia Duster, but for those who do, you probably know that it is insanely affordable. After being in the market for seven years, and after over a million units sold, it is finally going to get a second-generation model. To keep up with the current version, while keeping the costs minimal, Renault’s Romanian division will give the new generation the same underpinnings that will be housed in new exterior body as well as a more modern interior.
With this kind of reports circulating the net, it is unavoidable for artists with Photoshop skills to play with its current look and imagine the 2018 model year. For instance, we already found some photos from X-Tomi Design where artists are imagining all sorts of designs for the upcoming Duster. From these photos, we think that two of them may happen, while the other two are merely design experiments - the sporty GT and the three-door.
This basic version of the model with the unpainted bumpers could be an entry-level trim of the 2018 Dacia Duster. As you can see, it rides on a set of steel wheels, with unpainted side mirrors and door handles. We also heard that the company might lose the fog lights to really keep the starting price low. Some people may wonder why, but if the SUV’s unique selling point is its very affordable price, then you will probably agree.Read the entire article Check out these renderings of the 2018 Dacia Duster: Pickup truck, gt or coupe
After the 2018 BMW 6 Series GT’s reveal, we felt as though the Bavarian company received comments that they did not expect to hear from readers and fans. It seems like the latest liftback model did not appeal to many, and so far, the new model has not got a lot of fans. So, X-Tomi Design did a rendering of the 6 Series with an M6 guise, giving it some subtle changes, to make it look more appealing.
First of all, X-Tomi Design gave the M6 GT larger intakes and deeper side sills up in the front fascia. The grille has been given a black trim instead of the silver which makes it appear larger too. There have been several details that have been added such as the carbon fiber roof that make for a sportier design. It also comes with chrome side mirror covers instead of camouflaging it with the rest of the body. The front spoiler and side skirts have been made to look more aggressive, while the suspension has been lowered as well. To finish off the design, the wheels have been made bigger and were blacked out. The darker trims definitely made the 6 Series look more aggressive, and look less of a family car.
Well, I would say that the rendering did give the current model more appeal. With the high contrasts of the blacks and the whites, it definitely got more character as opposed to the original 6 series.Read the entire article Judge for yourself: Is X-Tomi’s M6 GT rendering better than the BMW 6-Series GT?
Mercedes-Benz commenced production of the X-Class pickup truck (2018 model year) in 2017, thereby entering the luxury pickup segment. Many expected BMW to follow suit, but until now the German premium carmaker remains unmoved for calls to make its own pickup truck. Thus, seeing a BMW pickup even in concept form would be a farfetched idea; but not with X-Tomi.
An automotive graphic designer who has released a number of amazing automotive renditions, X-Tomi has delved into a more interesting project in the guise of a BMW X7 pickup truck. All X-Tomi needed to do was to have an image of the newly unveiled BMW X7 sports utility vehicle, chopped off its rear end, and added a bed. This sounds simple, but the entire rendition process is really complicated. In the end, X-Tomi proved that a BMW pickup –as derived from an X7 SUV – does look elegant and utilitarian.
Nonetheless, X-Tomi’s rendition of a BMW X7 pickup is all hypothetical as the German luxury carmaker recently confirmed that it has no plans to go compete with Mercedes in the luxury pickup segment. Likewise, a new pickup derived from the X7 would mean it would be underpinned by a body-on-frame chassis that usually serves as the platform for pickups.Read the entire article BMW X7 SUV rendered as a luxurious pickup truck by X-Tomi
Just recently, BMW introduced its much-anticipated flagship SUV -- the all-new BMW X7 – after more than four years of wait. Now that it is finally arriving, high-performance customers are wondering how many years they would have to wait before the German premium carmaker creates a BMW X7 M.
The reality is that there is yet no clear sign that BMW would create an M version of the newly unveiled X7 SUV. While the X7 M is a possibility that can’t be discount, it might be hard to imagine how the high-performance version of BMW’s flagship SUV would look like. Good thing though, an automotive graphic artist is here to help with his own rendering of the BMW X7 M.
X-Tomi Design has been known for his renderings of still non-existent versions of vehicles that are in the market or have just been unveiled. His graphic works are usually realistic, to the point that it seems that his renderings were actual official images released by carmakers. X-Tomi latest comes in form of the BMW X7 M, which would be the high-performance version of the newly unveiled X7.Read the entire article This BMW X7 M looks like the real thing from the future
That was fast! It was only a few days ago when Skoda teased its newest creation – the new all-new Skoda Kodiaq GT coupe-SUV -- through three sketched images. Now, the Czech carmaker is formally introducing online the coupe version of its Kodiaq SUV, revealing a number of details that should excite potential buyers in China.
According to Skoda, the exterior of the new Kodiaq GT coupe SUVis wrapped in sporty proportions. With a length of around 4.63 meters, it is slightly shorter than the Kodiaq SUV. On the front, the new Kodiaq GT is marked by a black-framed grille with chrome-plated dual ribs, as bordered on top by a wide bonnet, on the sides by LED headlights, and on the bottom by a three-dimensional bumper. The new Kodiaq SUV also features a front spoiler with wide air inlets.
When viewed from the sides, the new Skoda Kodiaq GT reveals coupe-like flanks, clear precise lines and a gently sloping roofline, which slope starts from behind the front doors. The coupe SUV also features dynamic wheel arches as well as body-colored chiseled side skirts.Read the entire article China-exclusive Skoda Kodiaq GT coupe-SUV officially introduced
Finally, Skoda is entering the coupe-SUV segment. However, motorists in Europe or United States won't be able to get a piece of it. This is because Skoda is marketing the all-new coupe version of Kodiaq – the Skoda Kodiaq GT -- exclusive in China. It may arrive in other markets around the world, but for now, plans only involves exclusive sale in the Chinese market.
Skoda has yet to disclose important details about the all-new Kodiaq GT. Nonetheless, the fact that the Czech carmaker has released three design sketches, Skoda is all-bent to deliver a new coupe-SUV – as based on the Kodiaq SUV – for the Chinese market. This means that China will the only market in the world in which Skoda will be selling four SUV models: Kamiq, Karoq, Kodiaq and Kodiaq GT.
The new Kodiaq GT will be Skoda’s fourth SUV in China, and will be second exclusive model made just for the Chinese market, after the Kamiq. It will also be replacing the Kamiq as the brand’s most expensive SUV and its new flagship in China. According to the Czech carmaker, the Kodiaq GT coupe SUV is a demonstration of its commitment to the Chinese market, expecting the new model to be a key driver of the brand’s image.Read the entire article Skoda releases first sketches of its China-exclusive Kodiaq GT coupe-SUV
BMW has just unveiled the seventh generation of the BMW 3 Series, with the codename of G20, at the 2018 Paris Motor Show. Its high-performance version – the BMW M3 -- with codename of G80 – won't follow immediately, and is expected to be launched for the 2020 model year at the earliest.
The German premium carmaker may start teasing and then launch the next-gen BMW M3 as early as next year. This means that its fans and enthusiasts would have wait for at least a year before getting a good a look at the next-gen high-performance version of the BMW 3 series.
For those who can’t wait that long, the BMW M3 G80 can be previewed unofficially through a work by Aksyonov Nikita, an automotive graphic designer based in St. Petersburg, Russia. Nikita has rendered various versions of future and present vehicles, including those created by Aston Martin, BMW, Fiat, Ferrari, Lamborghini and Peugeot, as well as a lot more.Read the entire article This next-gen BMW M3 (G80) rendering is almost as real as the still-veiled M model
South Korean carmaker Kia has a new version of its Kia Ceed. It performs just like a standard Kia Ceed but it does look similar to the high-performance Kia Ceed GT. Kia believes that this new offering – the all-new Kia Ceed GT Line -- will strengthen the appeal of its new mid-size family car range.
The new Kia Ceed GT Line, which Kia has just unveiled at the 2018 Paris Motor Show, can be availed on every version of the new Ceed (Ceed five-door hatchback and Ceed Sportswagon). On the other hand, the ProCeed shooting brake variant comes standard as the Kia ProCeed GT Line.
On the exterior, the new Kia Ceed GT Line is laden with unique GT-inspired design elements a satin chrome and gloss black ‘tiger-nose’ grille surround, newly designed front and rear bumpers similar to that of the Ceed GT and ProCeed GT. Horizontal metallic ‘blades’ are found on the fog lamp surround. Available in any of the 10 available paint finishes, the new Ceed GT Line models rides on 17-inch wheels, on optional 18-inch GT Line alloy rims.Read the entire article 2018 Paris Motor Show: Kia Ceed GT Line borrows styling cues from Ceed GT hot hatch
A new hot hatch is ready to carry the high-performance will of South Korean carmaker Kia Motors. Designed, developed, engineered, and built in Europe, the new 2019 Kia Ceed could be considered as a more practical and more versatile version of the Hyundai Veloster Turbo, having the same engine and same power underneath their hoods.
Kia engineered and developed the new Ceed GT exclusively for European drivers and roads. It underwent six months of additional testing to ensure that the hot hatch is more agile and more engaging to drive.
The new Kia Ceed GT sits 5 mm lower than the standard Ceed and Ceed Sportswagon, allowing it to have a lower center of gravity. To offer a more assured ride without compromising drive comfort, the front and rear springs were made stiffer while the responses to steering inputs have been improved. The new Ceed GT also features softer front and rear anti-roll bars.Read the entire article 2019 Kia Ceed GT is a hot hatch with aggressive looks and 204 PS in power
Lanzante Motosport is taking advantage of the 2018 Goodwood Festival of Speed to showcase its latest conversion project – the McLaren P1 GT By Lanzante. Allegedly commissioned by a rich client from the Middle East, the McLaren P1 GT By Lanzante is essentially a McLaren P1 GTR converted into a Longtail, easily capturing the attention of visitors at Goodwood.
Doing a project based from a McLaren P1 GTR isn't something new to Lanzante. After all, the British racing had been converting the track-only P1 GTR for use on the road. Lanzante also had six P1 GTR units converted to become road-legal P1 LM versions. Five of these P1 LM units were sold while the sixth example was retained as the XP1 LM to be used for development and testing. Interestingly, the XP1 LM managed to set the fastest ever time for a road car on the Goodwood hillclimb of the 2016 Goodwood Festival of Speed, completing the 1.86-km course at just 47.07 seconds.
Now, another P1 GTR is making waves at the 2018 Goodwood Festival of Speed, but this time it has been converted into a longtail – the McLaren P1 GT By Lanzante. Prior to the event, Lanzante had been teasing us with the P1 GT conversion. The teases proved to be worth paying attention to, as the P1 GT revealed at Goodwood is spectacularly impressive.Read the entire article McLaren P1 GT By Lanzante Motorsport turns heads at 2018 Goodwood Festival of Speed
For those of you who follow news on Ferrari, we are pretty sure that you have seen the one of a kind SP38 nicknamed the “Deborah”, which simply is a 488 GTB that has gone through a number of cosmetic upgrades for it to look like a prettier coupe. But have you imagined a car like that, looking like a Spider? X-Tomi Design, and individual artist from Hungary decided to take out the car’s roof to imagine how the unique creation would look based on the 488 Spider.
The coupe’s lovely F40 inspired engine cover may be gone already, but the imaginary SP38 Spider still has everything they need to become a veritable showstopper, though there are zero chances of this to become a reality.
That’s because Ferrari has no plans of making an exact same model for another client, because the first client will probably not want a replica of his car. But instead, maybe the commissioned Deborah wants a matching Spider to go along with the Coupe. But don’t get us wrong because we are really just making up these scenarios in our minds.Read the entire article Ferrari SP38 gets rendered as a Spider
Audi A6 (C8) is still quite fresh in the market but already, artists have been rendering the said model, with variants of their own. Recently, we saw a hot RS6 makeover of the sporty saloon, but now, artist Tobias Buttner gives us his take on the German luxury saloon, giving it a more rugged theme. As you could see in the photos, this is a rendering of the A6 Allroad model. Like all the Allroad models, it adopts new body cladding and a higher ride height, both in an effort to enhance off road practicality.
The standard styling cues of the standard A6 are carried over, of course, but there are also a number of unique variations to note. For instance, the grille, while still large and imposing, features vertical chrome inserts as opposed to the horizontal design found of the standard model. The accenting vents have been made more subtle, and there is a silver running board located just below the grille.
Expect the ride height to be a little higher, and there’s plastic body cladding around the wheels that assures that it will be able to take on tougher roads, without leaving the paint of the fenders scratched. The previous model is just a bit taller, with its height raised by just 3.5 centimeters (35 mm) over the standard sedan, with an available one extra centimetre (10 mm) of lift available at low speeds. Expect similar figures for the new model; that is, if Audi chooses to build it.Read the entire article Tobias Buttner renders a rugged, more capable 2019 Audi A6 (C8) Allroad
Mercedes-Benz has published images of the new A-Class hatchback and sedan models, together with spy shots of the B-Class, CLA, GLA and the GLB. But one thing we have not seen yet is the CLA Shooting Brake. While we’ve heard rumours that the swoopy wagon won’t be renewed, we think that the opposite is true.
In January 2017, Autocar heard from Mercedes’ sales and marketing boss, Britta Seeger, that the wagon will be getting a second generation version. There has been no retraction so we take that as a signal that we will soon see a new generation of the CLA SB. Nevertheless, we regret to say that the larger model, the CLS Shooting Brake, has been terminated due to low demand.
It is true that a lot of people have a thing for wagons, but the number of people who are shifting to crossovers and SUVs are significantly more, and really, automakers will just have to head towards the direction where their business will flourish. This is also why we should be glad that Mercedes-Benz is still giving the CLA Shooting Brake a second generation model.Read the entire article X-Tomi’s rendering of Mercedes-Benz A-Class Wagon is a stylish Shooting Brake
Volkswagen had decided that the 2019 Touareg will not be sold in the United States market. But luckily for European customers, they will be able to acquire the German marque’s new flagship SUV. Now, it has a bold new look as well as a more high tech cabin. It will also be offered with a number of engines, like a pair of turbocharged 3.0 liter diesel options. The 2019 model is definitely an upgrade.
As you have noticed, the industry’s new trend is more focused on coupe style SUVs. Therefore, the 2019 Touareg is not immune, and is simply just part of the trend - at least in the real world. Now, rendering artist Aksyonov Nikita has reimagined the new Touareg as a sleek coupe SUV, and it looks incredible. You may have noticed that we have featured many of Nikita’s works in the past.
When looking at the rendering, you would notice that it keeps the same design elements as those of the original model - from the front fascia, which includes the matrix style LED headlights, to the more defined grille, and lower vents. The wheels are pretty new, which seemed to have been borrowed from the Arteon sedan, complemented by its teal shade. It is actually out back where most of the restyled elements can be seen.Read the entire article Rendering of 2019 VW Touareg sees it join the sleek SUV coupe trend
BMW has just unveiled the new BMW Concept M8 Gran Coupe at the 2018 Geneva Motor Show. This concept vehicle serves as the precursor model for the upcoming new BMW 8 Series Gran Coupe and the BMW M8 Gran Coupe, providing a glimpse of how these models could look like.
Nonetheless, concept models are usually more aggressive and more dramatic in terms of design compared to the production model. Thus, when BMW M8 Gran Coupe becomes a reality, it is expected to be a subtle version of the BMW Concept M8 Gran Coupe. To help us imagine how the BMW M8 Gran Coupe might actually look like when it comes to life, X-Tomi Design has created a rendering of the production model.
X-Tomi Design made sure that the rendered BMW M8 Gran Coupe doesn’t stray away too much from the BMW Concept M8 Gran Coupe in terms of exterior looks. The rendered M8 Gran Coupe by X-Tomi Design features a front end defined by a slightly taller grille.Read the entire article X-Tomi imagines production version of BMW Concept M8 Gran Coupe
Mercedes-Benz has not unveiled the A-Class Sedan yet, though we think that we will see it very soon because the automaker has already revealed the hatchback, and it should not be too long for the saloon to come out this year.
The Germany based automaker displayed a concept at the 2017 Shanghai Auto Show. But we have to agree that this model, in Shooting Brake guise, will be absolutely stunning. Aksyonov Nikita has already done the work for us. He released images of an A Class Shooting Brake that looks ready to enter production.
In 2017, the automaker actually made it clear that they will draw a distinct line between the A-Class sedan and the next generation CLA by giving the CLA a fastback styling. The A-Class is going to be the model the CLA will be based on, and will then use the front wheel drive platform of the A-Class, though it will adapt its own distinct style. This will then be placed above the A-Class Sedan in Mercedes’ lineup.Read the entire article Artist creates Shooting Brake version of 2019 Mercedes-Benz A-Class
The 2019 BMW X4 (G02) boasts an updated exterior and tech-heavy cabin. Physically, the SUV has grown in size and is now three inches longer than its predecessor, and this means more legroom for rear passengers as well. This X4 is scheduled to be out in dealerships sometime in July, but rendering artists have already gone to work on imagining an M version of this.
The rendering artist who created the X4 M is none other than X-Tomi Design. At first glance, you will notice that the more hardcore variant gets a lot of obvious cues from the base model - including the dual kidney grille and the sloped roofline. But it also gets some added elements that make it extra unique.
Instead of the original chrome grille inserts, the BMW X4 M’s had been blacked out. The lower air vent on the grille is now larger and more defined. Each corner is accented by two smaller vents, each one embedded with LED running lights. Its entire body has been lowered to the ground, while the roof has a carbon fiber treatment finished in black - overall, making it look more aggressive.Read the entire article BMW X4 M rendered, gets closer to the ground and is more aggressive
Recently, Mercedes-Benz announced that their new compact family will have at least 8 members. That’s a lot to swallow but we never really considered the A-Class would be associated with the Maybach sub brand.
But apparently, its inclusion makes sense to one artist, and that is Aksyonov Nikita. He rendered something that he calls the Mercedes Maybach A-Class. Of course, he took inspiration from no other than other Maybachs in Mercedes’ range - and by looking at his creation, all we can say is that it looks interesting.
The most obvious element in this rendering is the paint. We think that Nikita got this shade of blue from the Mercedes-Maybach 6 Cabriolet Concept, except that it has a matte finish instead. Moreover, its front grille as well as the eye catching multi-spoke rims seem to also come from the same model.Read the entire article Mercedes-Maybach A-Class rendered... because why not!
What is the first thing that comes to mind when you see a mid-engined European sports car? Well, that depends on who you are talking to. Some will look at it as a piece of art, while others would see as an opportunity. An opportunity for what, you ask? Well, an opportunity to imagine something even greater.
Yup, the 911 RSR that, without a doubt, is the fastest and most mind-blowing production 911 ever built - with a 4.0 liter naturally aspirated flat-six ahead of the rear axle. As for performance, it can chase its 9500 rpm redline like that of a 510 horsepower, race tuned flat six. This does not even have turbos that will soften throttle response.Read the entire article Porsche Cayman RSR race car gets rendered
Did you film an important event?