limited edition, bike
List of News and Information about limited edition and bike on 4WheelsNews.com
News and Information about limited edition and bike
Read the latest news and information about limited edition and bike published on 4WheelsNews.com! View comments and pictures about limited edition and bike on 4WheelsNews.com!
For those of you who just placed an order for a new BMW M5 (F90), you might like to pair it with a matching bicycle. The BMW M Bike Limited Carbon Edition is finished in Marina Bay Blue Metallic paint, exactly like that of the sports sedan.
However, if you want this bike, you have to act quickly. That is because it will be limited to 500 units only, each of which will be priced at 1,400 euros (around $1,674). The bicycles are made with hydro-formed aluminum frame, while the fork, the seat posts and spacers are all made of carbon fiber to reduce overall weight. For easier braking, it gets a set of hydraulic Shimano disk brakes.
As we all know, the BMW M5 comes equipped with a 4.4 liter biturbo engine that enables it to give out 600 horsepower (447 kilowatts) and 553 pound-feet (750 Newton-metres) of torque. The M5 is more powerful than its predecessor, which has an output of 575 horsepower (428 kilowatts) and 500 pound-feet (677 Newton meters) of torque.Read the entire article BMW reveals M Bike Limited Carbon Edition inspired by Marina Bay Blue M5 (F90)
If you do get a chance to get your hands on the Range Rover SV Coupe, we would suggest for you to get one because this will remain limited and is likely not going make it into full production.
Earlier this month during the 2018 Geneva Motor Show, the SV Coupe was revealed as a limited edition model, and also the most expensive Range Rover with a price tag of $295,995. But recently, we learned that Land Rover has no plans to make production go beyond the 999 units that had been set.
Wayne Darley, senior product marketing manager, stated that to keep the model exclusive, then the best thing they could do is to limit production of the model. By doing so, you are protecting the exclusivity of the model and therefore, these investments are secured. This began with the Project 7 that was inspired by the 250 run Jaguar F-Type which got its roots from the 1950s D Type. That car was once sold for £130,000 (or $183,800), and is now available for over £200,000 (approximately $282,700).Read the entire article Range Rover SV Coupe will remain as a limited model
Not a lot may have heard of Lee Iacocca, but we are pretty sure that you all know of his creation - and that would be none other than the Ford Mustang. Iacocca was the former Ford executive that turned the former concept into a reality. Not only did he turn the Mustang into production, but he also groomed it into the icon that we know it today.
To celebrate this, Ford and Galpin decided to come up with a special Mustang to celebrate the nameplate’s 45th anniversary. They named the unique version the Iacocca Silver Edition Mustang, and guess what? It will be sold off this April.
The rear wheel drive sports car will be put up for auction at the Barrett Jackson Palm Beach 2018 sale. It will be a rare treat for collectors as this is one of only 45 examples ever built and it comes with a number of unique design and performance elements to boot. This includes a special plaque in the engine bay to signify its rarity.Read the entire article Limited edition Ford Mustang Iacocca is up for grabs at Barrett-Jackson Palm Beach 2018 sale
Lotus has been developing a new generation of sports cars, but these cars will probably not be available until 2020. So for customers who don’t want to wait too long, the automaker decided that they will sell one last special version of the immortal 3-Eleven 430, or the “most extreme machine” it has ever built.
This will also be highly exclusive as they only have plans of assembling 20 examples, each one carrying a price of £102,000 or approximately $142,000 at current exchange rates.
This 3-Eleven 430 has been equipped with a 3.5 liter V6 engine under its hood, producing as much as 430 horsepower (321 kilowatts) and 324 pound feet (440 Newton metres) of torque. The automaker boasts that in just 3.2 seconds, this model can accelerate from 0 to 62 miles per hour (100 kilometers per hour), before it continues to its top speed of 180 miles per hour (290 kilometers per hour).Read the entire article Lotus launches fastest, most extreme machine yet – the 3-Eleven 430
Congested city traffic is a stark contrast to the freedom of marine navigation. But for those who want to experience lavishness in a small urban mobility package like the smart fortwo cabrio, German tuning company Brabus and luxury yacht-maker Sunseeker London Group has an enticing proposition – the new Brabus Smart ForTwo Ultimate Sunseeker Limited Edition “One of Ten.”
The new Brabus Ultimate Sunseeker Limited Edition “One of Ten” is a city sports car jointly created by the collaboration between Brabus and Sunseeker. This limited edition city car -- marking the two brand’s first joint luxury car -- was unveiled during the grand opening of their joint “KÖ90” flagship store in Königsallee 90 in Dusseldorf, Germany.
As a creation of one of the renowned tuners in the automotive world, the Brabus Ultimate Sunseeker Limited Edition “One of Ten” is provided with special sporty elements and some tuning works. Likewise, the limited edition is identified also as a creation of Sunseeker through the Sunseeker logo on the rear and the two mirror triangles as well as a nautical compass on each side of the tridion cell. The limited edition is wrapped in a “Midnight Sapphire” special metallic blue finish that is contrasted at the rear and sides with “Silver Lake Metallic” accents.Read the entire article Boating-inspired Brabus Smart Fortwo Sunseeker is priced at 59,900 euros
It was back in October 2015 when we first saw the Performance version. It served as the ultimate expression of the RS6 Avant that produced as much as 597 horsepower (445 kilowatts) that it got from its biturbo 4.0 liter V8. Now, it is 2018 and there is a new king, thanks to the collaboration between Audi and ABT Sportsline - the Nogaro Edition. There are only 150 examples of this special edition high performance wagon by Ingolstadt.
This special edition model pays tribute to the iconic RS2 model, which was launched in 1994. It is actually considered as the automaker’s first ever RS model. Now, the RS6 Avant Nogaro Edition is finished in Nogaro blue paint (and that is actually where it got its name). To give the body a little bit of a contrast, it also gets some black accents all over its body.
This is finished off with a new set of 21 inch wheels with thick 285/30 tires and of course, we can’t forget the RS titanium exhaust system it has been equipped with to make the most out of the V8 powerhouse.Read the entire article 2018 Audi RS6 Avant Performance Nogaro Edition has impressive specs
The McLaren F1 is considered to be one of the most difficult models to get your hands on and it’s even more elusive now especially since its prices have gone up in excess of $10 million when being auctioned.
So instead of letting customers cry over the F1, McLaren Newport Beach decided that they would work with their special division, McLaren Special Operations to give 10 of their customers the next best thing: custom MSO X examples of the 570S Coupe with exterior inspiration from the competition livery of an F1 GTR race car.
When looking at the MSO X 570S from the outside, it is apparent that the model gets inspiration from the 570S GT4 race car, except that they are road legal. The sides of the bumpers now get dive plates, while the competition inspired hood features additional intakes.Read the entire article McLaren Special Operations unveils MSO X: 10 road-legal 570S Coupes inspired by GT4
There are so many aftermarket tuners out there that have been turning out pretty amazing Land Rover Defenders. It’s their popularity perhaps that has urged the automaker itself to join the throng. In fact, Jaguar Land Rover’s Classic division has built 150 old-style Defenders right in the outskirts of Coventry.
The special edition Defender was made to celebrate 70 years of the iconic off-roader in 2018, before an all new version of the vehicle makes its debut. It’s said to look very different from the current version.
Under the hood of the Defender Works V8 is a 5.0 liter naturally aspirated V8. This carries out as much as 405 horsepower and 515 Newton-metres (380 pound-feet) of torque. This makes it the most powerful officially sanctioned Defender to hit the road. In just 5.6 seconds, it will reach 62 miles per hour (100 kilometers per hour) from a standstill, and is capable of hitting a maximum limited top speed of 106 miles per hour (170 kilometers per hour).Read the entire article Check out this 70th anniversary limited edition V8 Land Rover Defender
It’s Star Wars fever once again, and the second installation of the trilogy sequel -- “Star Wars: The Last Jedi” -- is finally hitting theaters. Avid fans of the franchise would love to know that a limited edition Renault Zoe will soon arrive with Star Wars special touches. In partnership with Star Wars, Renault is unleashing the force with the new 2018 Renault Zoe Star Wars Limited Edition electric vehicle.
Just like Anakin Skywalker and Ben Solo becoming Darth Vader and Kylo Ren, respectively, the best-selling EV in Europe has transformed into the Renault Zoe Star Wars special edition. Interestingly, the Zoe Star Wars isn't the first vehicle from the Renault-Nissan-Mitsubishi alliance to use the force. Just last year, Nissan’s mid-size crossover merged into the world of the Jedi by becoming the Nissan Rogue: Rogue One Star Wars limited edition. That marked the first time that a carmaker officially partnered with the Star Wars franchise. The partnership now continues, but with Nissan’s alliance partner Renault.
To enter the world of the Jedi, the Renault Zoe Star Wars features an exterior covered with a number of decals related to the franchise. For instance, the bonnet, roof and boot of the Renault Zoe Star Wars sport decals starring Han Solo’s Millennium Falcon star ship. Specific Star Wars badging can be found on the front fenders just below the A-pillar, as well as on the door sills.Read the entire article Renault now accepts pre-orders for Zoe Star Wars Limited Edition
After having recently released teaser images of the new McLaren Senna, the automaker is finally ready to make a proper unveiling. The Senna, which is part of the Ultimate Series, gets its name from legendary Formula 1 driver Ayrton Senna de Silva. It will stand as the automaker’s most track-focused, road legal car. The automaker plans to build only 500 examples of this model, with profits going to the Senna Foundation charity. The Senna has a price tag of £750,000 ($1 million), in the UK, and believe it or not, all 500 units have already been accounted for.
Undoubtedly, the Senna has a unique exterior design. It was made to be very sleek to boost its performance. This model follows the “form follows function” principle, and its shape is meant to reduce drag and boost cooling. This car spent hours in the wind tunnel, a fact that’s quite obvious as soon as you take note of its double rear diffuser to the underfloor scoop and the large rear wing.
The Senna has interesting see-through glass door panels. Furthermore, the carbon ceramic brakes it wears together with the Pirelli P-Zero Trofeo R tires took seven months to assemble. The interior has a minimalist design that boasts a generous amount of carbon fiber. The cabin features goodies like an infotainment system, rearview camera, a foldable driver’s display, and a sound system. Each car will come with tailor-made carbon seats too.Read the entire article 2018 McLaren Senna gets official
For those of you who are aware of Spyker, you must have heard of the C8 Aileron. The said model has been around for about eight years now and the Dutch automaker has finally decided to give an end to its life. And to give it a proper goodbye, Spyker will produce the final three examples in the racing inspired LM85 spec, together with matching motorsport-inspired liveries.
To achieve this look, the automaker will make use of exposed rivets to attach the LM85’s body panels to the C8 Aileron. It will be given wider fenders as well. The billet aluminum intakes give the exterior a bright flourish. And since the automaker is only going to build three examples of the vehicle, each one of them will be getting a unique paint job.
One of them will be finished in a Jet Black finish with Crimson Red S accents that decorate the body, while the other one is a reverse of the first one, getting a Crimson Red with Jet Black S accents. The third model will be dressed in Jet Black with a Gold S. All three examples will be getting a two-tone leather inside, paired with an aluminum dashboard, accented with Chronoswiss gauges.Read the entire article Spyker ends reign of the C8 Aileron with final 3 units in LM85 specs/liveries
When Mercedes-AMG created the new Mercedes-AMG GT R, Mercedes-Benz’s high-performance brand had the racetrack in mind. Since most of the development time of the AMG GT R was spent in the "Green Hell" of the Nurburgring, the AMG GT R earned the nickname the “Beast of the Green Hell.” Now, that mindset is translated from four wheels into two wheels, resulting to the creation of the ROTWILD R.S2 Limited-Edition Beast of the Green Hell.
As its name indicates, the ROTWILD R.S2 Limited-Edition "Beast of the Green Hell" is a special-edition hand-built racing bike that takes heavy inspiration from the AMG GT R. While the development of the AMG GT R was underpinned by AMG’s vast experience in AMG GT3 customer sport and in the German Touring Car Masters, that of the ROTWILD R.S2 Limited-Edition "Beast of the Green Hell" is cored on driving dynamics, design, comfort and lightweight construction.
Just like the AMG GT R, the ROTWILD R.S2 Limited-Edition "Beast of the Green Hell" racing bike employs a number of state-of-the-art technology. While the AMG GT R employs intelligent lightweight construction incorporating aluminum and carbon with specific reinforcements in the body shell, the hand-built frame of the special edition bike takes on "Carbon Module Monocoque Technology" (MMT2) as well as "High Modulus" and "High Tenacity" fibresto. This allowed the bike frame to offer high levels of rigidity with ideal damping properties while weighing as low as possible.Read the entire article Rotwild R.S2 Beast of the Green Hell racing bike pays tribute to Mercedes-AMG GT R
Automakers sometimes want to have fun and experiment on building other toys too, such as bikes. And now is not the first time you’ve heard of this, and it definitely won’t be the last too. Aston Martin has recently launched a limited edition bicycle of its own.
This was made possible by their partnership with German bicycle manufacturer Storck. Together, the British automaker and the German firm came up with a bike they call the Fascenario.3. Of course, expect this bike to be a limited edition model, with only 107 examples worldwide. And the automaker boasts that the bike is a perfect combination of “aerodynamics, stiffness, and comfort”.
The bicycle is mostly made out of a lightweight “Nanocarbon Technology”, which only weighs a total of 1.7 pounds (770 grams) - that’s just the frame though. But overall, with the other components including the brakes, wheels, tires, gearing, and the rest of the parts needed to complete a bike, it only weighs 13 pounds (5.9 kilograms). How cool is that, just imagine carrying a kettle bell, but instead, you’re carrying a bike.Read the entire article Aston Martin Fascenario.3 is a super lightweight bike with a very big price
Lamborghini recently introduced the Aventador S Roadster just over a month ago at the 2017 Frankfurt Motor Show. And already, the V12 powered convertible is going to receive a special edition treatment. The 400 GT model was created to celebrate the 50th anniversary of the raging bulls, and it will only be limited to five cars. Each one of the Japan edition models will be one-offs since the Ad Personam department and the Cento Stile both gave them unique looks that take inspiration from the five natural elements of Japanese culture: earth, wind, fire, water and sky.
The one you can see in the photos, from its official unveiling in Japan, is the “water” edition. On the same day, the Italian marque also came up with the second edition of the Lamborghini Day Concours d’Elegance Tokyo. In this event, Lamborghini displayed a total of 50 cars. A few of the notable models included here are the gorgeous Miura, the Diablo and Countach. Alongside these were vehicles like the restored Miura SV and a 1976 Countach LP. And guess who won the “Best of Show” award? Well, it was the Countach LP. During the event, the automaker also presented scale models of the other four cars based on the remaining elements that will soon be produced.
Let us not veer away from talking about the gorgeous Aventador S Roadster. The exterior livery was finished by a team of ten specialists by around 170 hours. The paint turns out with a nice finish that contrasts with the exposed carbon fiber that is used for the hardtop and the windscreen frame. There is also a ‘50 Japan’ badge near the vehicle’s rear fender.Read the entire article Special edition Japan-exclusive Lamborghini Aventador S Roadster 50th Anniversary unveiled
In an exclusive speaking engagement with Car Advice during the ongoing 2017 Frankfurt Motor Show in Germany, Lamborghini’s Maurizio Reggiani hints at introducing what he calls as the new version of a one-off supercar, even adding that this one-off could be completely sold prior to its revelation. This is comparable to the case of Centenario, which they had introduced with rear wheel steering and which was later on adapted into the Aventador S when it came into production. The director for research and development also said that the company is set to announce some new technologies to go with Lamborghini’s new design. The imminent announcement, he said, is what Lamborghini’s loyal patrons have actually been waiting for.
It can be recalled that Lamborghini had done this previously with the Sesto Elemento, the Veneno Roadster, the Concept J as well as for both the Reventon and the Reventon Roadster. As they did with the Centenario, the soon-to-be-revealed one-off will take the lead in introducing Lamborghini’s future design and technologies. Inevitably, it should give us a first look at the Aventador replacement that is due for release in 3 years.
No concrete details have been confirmed during the talks but Car Advice knew that the Lamborghini Urus will be revealed sometime this December. In the same way, it is likely the new one-off (which is currently without a name yet) will be introduced later within the year while the official public debut will probably have to wait until 2018. At the most, we should be expecting Lamborghini’s one-off supercar at next year’s Geneva Motor Show together with the new Urus.Read the entire article Lamborghini to introduce new limited-edition supercar, new techs coming very soon
The very first fruit of the collaboration between the oldest bicycle maker in Italy (also in the world) and the legendary Italian sports car manufacturer has finally been introduced. Bianchi and Ferrari is presenting an all-new road bike – the SF01 – as the first of the Scuderia Ferrari branded high-performance bikes, as developed by taking inspiration from racing cars in the Formula One.
SF01 comes as the first-born of the “Bianchi for Scuderia Ferrari” project, with developments done in close collaboration between the R&D and Design departments of Bianchi and Ferrari. With a weight of only 780 grams, the SF01 is an ultra-light high-performance road bike. Made from carbon and benefiting from racing geometry, the SF01 is a really lightweight bike. In addition, the SF01 features a stiff carbon frame engineered with Countervail vibration cancelling technology. Employing a special fiber architecture and viscoelastic resin, this technology could cancel up 80 percent of vibrations, which means that power and control could be optimized further.
Moreover, the SF01 employs the Astute One saddle, which only weighs around 94 grams. This saddle is made of 3k carbon, the same materials used for the seats of Ferrari’s F1 race car. The handlebar of the SF01 is wrapped in Astute’s anti-vibration Luxury Black tape, which provides an iconic black-velvet effect. The new SF01 rides on Speed 40C Carbon wheels from Fulcrum. These wheels – featuring Scuderia Ferrari custom graphics and carbon hubs – weigh only 1,420 grams.Read the entire article $18,000 SF01 road bike is first product to come out of ‘Bianchi for Scuderia Ferrari’ project
Donkervoort, the Dutch sports car manufacturer, is making the most of a limited run of the sold out D8 GTO RS, at only 40 units. But this time, an even rarer model will be made with only 15 examples - that is the Naked Edition of the said model. As of today, the company has already sent out 20 units of the standard model to their respective owners, as well as the very first example of the Naked Edition D8 GTO RS. It was delivered to its new owner located somewhere in Germany.
Naturally, the Naked Edition will stand out due to its eccentric design, but even more so with its striking Monte Carlo Blue Carbon finish. The carbon fiber body was then given a transparent paint that was developed by both Donkervoort and BASF’s upscale brand R-M. What makes this finish so cool is that you could still see the carbon fiber through it. Ninety-five percent of the bodywork is made out of the lightweight material, including the roll-bar trim, the headlight housing and the ignition cylinder housing.
To cut down some more weight, Donkervoort used some spray on carbon components on some areas instead of painting them, which really helped with the diet. By doing all this, one would expect the D8 GTO RS to be extremely light, and true enough, the special edition only weighs a total of 695 kilograms (1,532 pounds) - that is quite an impressive weight for a sports car.Read the entire article First Donkervoort Naked Edition D8 GTO RS has been delivered
Luxury automakers often come up with something special or limited when celebrating special events like anniversaries or when they reach a milestone. And this year, McLaren celebrates their 50th F1 anniversary. So the first thing you’ll probably ask is, what special edition model are they going to unveil? Well, it isn’t an F1 car, but a road bike instead.
The street bike is a product of McLaren and Specialized as they work together to build a bike that would blend in with any road race, while celebrating fifty years of historic grand prix and Formula One racing. They call this the S-Works McLaren Roubaix, a road bike with a handful of collaborations between both brands, after the Venge, the S-Works Tarmac and the Venge ViAS.
Looking at it from afar, it looks like it had been painted in yellow. But it is actually finished in a custom Heritage Orange that mimic the automaker’s race cars and modern street legal vehicles, accented with matte black parts. The road bike uses McLaren’s own data logging software that works hand in hand with the Rolling Efficiency Simulator, which is the software they use when designing a part of the bike.Read the entire article This $11,500 road bike marks McLaren’s 50th F1 anniversary
The world never runs out of adventure, which is why BMW Lifestyle has teamed up with “Specialized” to develop the special edition E-mountain bike. Branded as Specialized Turbo Levo FSR 6Fattie, the exclusively designed mountain bike has been given the new Phytonic Blue paint job to match the official color of the 3rd generation BMW X3 (G01).
To further complement the new SUV, the trail bike is equipped with a water bottle with the tagline “Specialized For BMW”. The price? Let’s just say the regular Specialized Turbo Levo FSR 6Fattie costs $4,500 (or about 3,900 in euros in Germany). Now for those who want the special edition BMW version of the mountain bike, they can have it for the price of $5,900 (5,200 euros).
What makes it more interesting to have is that the e-bike features a 504Wh battery pack with a dock that lets you recharge its battery off the bike. Similarly, BMW developed a special charging cable that can be hooked to the SUV’s 12V power socket without compromising its own supply.Read the entire article BMW unleashes the new X3 (G01) with a matching mountain e-bike
Nowadays, it is rather inevitable that luxury pickups have been quickly making rounds, and they have served as a significant asset for Ram ever since the brand separated itself from Dodge. Ram presently has various luxury trims including the Long Horn, Laramie and Limited produced among the 1500, 2500 and 3500 models and now it looks like they will introduce another vehicle to their line-up. According to the Fiat-Chrysler owned truck manufacturer, these trucks will be given a new range topping trim labelled the Limited Tungsten Edition.
2018 Ram Limited Tungsten Edition will be added to the already stellar line-up of Ram. The ultra swanky truck will be offered on the 1500, 2500 and 3500 in the 3rd quarter of this year and it will fetch around $55,120 for the high-end trim on the 1500. The newest edition offers more awesome luxurious novelties onto the recent range-topping Limited trim. We can recognize these premium units by the outer shell that will don a dark chrome grille with RAM engraving. For the trim and badges, there are metallic accents to match them.
The bumpers, door handles, mirror caps and running boards reflect the body color while its headlights flaunt the black surrounds from the Sport unit. Adding a final touch to the exterior enhancements are the satin-finish variants of the Limited wheels. Buyers can choose to have the Tungsten Edition in Bright White, Bright Silver Metallic, Delmonico Red Pearl, Brilliant Black Crystal, Granite Crystal Metallic, True Blue Pearl or Pearl White. However, the Maximum Steel Metallic will only be offered on the 1500. The Tungsten Edition's interior is where the magic begins.Read the entire article 2018 Ram Limited Tungsten Edition is the most luxurious pickup ever
Did you film an important event?