mercedes-benz cls, rendering
List of News and Information about mercedes-benz cls and rendering on 4WheelsNews.com
News and Information about mercedes-benz cls and rendering
Read the latest news and information about mercedes-benz cls and rendering published on 4WheelsNews.com! View comments and pictures about mercedes-benz cls and rendering on 4WheelsNews.com!
During the recent 2017 Los Angeles Auto Show, one of the few cars that stood out would be this 2019 Mercedes-Benz CLS that made its debut. Because it turned heads, it has inevitably become a favourite among rendering artists.
Some of them may just be for the hell of it, like the Coupe and the Cabriolet. The newest one looks actually quite promising. Imagined by artist Aksyonov Nikita, is a four-door coupe in the range topping AMG guise.
Up front, some of the noticeable changes would be the new bumper and the modified grille that includes the AMG badging. The rear end, on the other hand, gets a new bumper, carbon fiber diffuser and a boot lid spoiler, as well as quad tailpipes.Read the entire article 2019 Mercedes-Benz CLS rendered as a Coupe, Cabriolet and in AMG guise
BMW has just unveiled the seventh generation of the BMW 3 Series, with the codename of G20, at the 2018 Paris Motor Show. Its high-performance version – the BMW M3 -- with codename of G80 – won't follow immediately, and is expected to be launched for the 2020 model year at the earliest.
The German premium carmaker may start teasing and then launch the next-gen BMW M3 as early as next year. This means that its fans and enthusiasts would have wait for at least a year before getting a good a look at the next-gen high-performance version of the BMW 3 series.
For those who can’t wait that long, the BMW M3 G80 can be previewed unofficially through a work by Aksyonov Nikita, an automotive graphic designer based in St. Petersburg, Russia. Nikita has rendered various versions of future and present vehicles, including those created by Aston Martin, BMW, Fiat, Ferrari, Lamborghini and Peugeot, as well as a lot more.Read the entire article This next-gen BMW M3 (G80) rendering is almost as real as the still-veiled M model
For those of you who follow news on Ferrari, we are pretty sure that you have seen the one of a kind SP38 nicknamed the “Deborah”, which simply is a 488 GTB that has gone through a number of cosmetic upgrades for it to look like a prettier coupe. But have you imagined a car like that, looking like a Spider? X-Tomi Design, and individual artist from Hungary decided to take out the car’s roof to imagine how the unique creation would look based on the 488 Spider.
The coupe’s lovely F40 inspired engine cover may be gone already, but the imaginary SP38 Spider still has everything they need to become a veritable showstopper, though there are zero chances of this to become a reality.
That’s because Ferrari has no plans of making an exact same model for another client, because the first client will probably not want a replica of his car. But instead, maybe the commissioned Deborah wants a matching Spider to go along with the Coupe. But don’t get us wrong because we are really just making up these scenarios in our minds.Read the entire article Ferrari SP38 gets rendered as a Spider
Audi A6 (C8) is still quite fresh in the market but already, artists have been rendering the said model, with variants of their own. Recently, we saw a hot RS6 makeover of the sporty saloon, but now, artist Tobias Buttner gives us his take on the German luxury saloon, giving it a more rugged theme. As you could see in the photos, this is a rendering of the A6 Allroad model. Like all the Allroad models, it adopts new body cladding and a higher ride height, both in an effort to enhance off road practicality.
The standard styling cues of the standard A6 are carried over, of course, but there are also a number of unique variations to note. For instance, the grille, while still large and imposing, features vertical chrome inserts as opposed to the horizontal design found of the standard model. The accenting vents have been made more subtle, and there is a silver running board located just below the grille.
Expect the ride height to be a little higher, and there’s plastic body cladding around the wheels that assures that it will be able to take on tougher roads, without leaving the paint of the fenders scratched. The previous model is just a bit taller, with its height raised by just 3.5 centimeters (35 mm) over the standard sedan, with an available one extra centimetre (10 mm) of lift available at low speeds. Expect similar figures for the new model; that is, if Audi chooses to build it.Read the entire article Tobias Buttner renders a rugged, more capable 2019 Audi A6 (C8) Allroad
Mercedes-Benz has published images of the new A-Class hatchback and sedan models, together with spy shots of the B-Class, CLA, GLA and the GLB. But one thing we have not seen yet is the CLA Shooting Brake. While we’ve heard rumours that the swoopy wagon won’t be renewed, we think that the opposite is true.
In January 2017, Autocar heard from Mercedes’ sales and marketing boss, Britta Seeger, that the wagon will be getting a second generation version. There has been no retraction so we take that as a signal that we will soon see a new generation of the CLA SB. Nevertheless, we regret to say that the larger model, the CLS Shooting Brake, has been terminated due to low demand.
It is true that a lot of people have a thing for wagons, but the number of people who are shifting to crossovers and SUVs are significantly more, and really, automakers will just have to head towards the direction where their business will flourish. This is also why we should be glad that Mercedes-Benz is still giving the CLA Shooting Brake a second generation model.Read the entire article X-Tomi’s rendering of Mercedes-Benz A-Class Wagon is a stylish Shooting Brake
Volkswagen had decided that the 2019 Touareg will not be sold in the United States market. But luckily for European customers, they will be able to acquire the German marque’s new flagship SUV. Now, it has a bold new look as well as a more high tech cabin. It will also be offered with a number of engines, like a pair of turbocharged 3.0 liter diesel options. The 2019 model is definitely an upgrade.
As you have noticed, the industry’s new trend is more focused on coupe style SUVs. Therefore, the 2019 Touareg is not immune, and is simply just part of the trend - at least in the real world. Now, rendering artist Aksyonov Nikita has reimagined the new Touareg as a sleek coupe SUV, and it looks incredible. You may have noticed that we have featured many of Nikita’s works in the past.
When looking at the rendering, you would notice that it keeps the same design elements as those of the original model - from the front fascia, which includes the matrix style LED headlights, to the more defined grille, and lower vents. The wheels are pretty new, which seemed to have been borrowed from the Arteon sedan, complemented by its teal shade. It is actually out back where most of the restyled elements can be seen.Read the entire article Rendering of 2019 VW Touareg sees it join the sleek SUV coupe trend
BMW has just unveiled the new BMW Concept M8 Gran Coupe at the 2018 Geneva Motor Show. This concept vehicle serves as the precursor model for the upcoming new BMW 8 Series Gran Coupe and the BMW M8 Gran Coupe, providing a glimpse of how these models could look like.
Nonetheless, concept models are usually more aggressive and more dramatic in terms of design compared to the production model. Thus, when BMW M8 Gran Coupe becomes a reality, it is expected to be a subtle version of the BMW Concept M8 Gran Coupe. To help us imagine how the BMW M8 Gran Coupe might actually look like when it comes to life, X-Tomi Design has created a rendering of the production model.
X-Tomi Design made sure that the rendered BMW M8 Gran Coupe doesn’t stray away too much from the BMW Concept M8 Gran Coupe in terms of exterior looks. The rendered M8 Gran Coupe by X-Tomi Design features a front end defined by a slightly taller grille.Read the entire article X-Tomi imagines production version of BMW Concept M8 Gran Coupe
Mercedes-Benz has not unveiled the A-Class Sedan yet, though we think that we will see it very soon because the automaker has already revealed the hatchback, and it should not be too long for the saloon to come out this year.
The Germany based automaker displayed a concept at the 2017 Shanghai Auto Show. But we have to agree that this model, in Shooting Brake guise, will be absolutely stunning. Aksyonov Nikita has already done the work for us. He released images of an A Class Shooting Brake that looks ready to enter production.
In 2017, the automaker actually made it clear that they will draw a distinct line between the A-Class sedan and the next generation CLA by giving the CLA a fastback styling. The A-Class is going to be the model the CLA will be based on, and will then use the front wheel drive platform of the A-Class, though it will adapt its own distinct style. This will then be placed above the A-Class Sedan in Mercedes’ lineup.Read the entire article Artist creates Shooting Brake version of 2019 Mercedes-Benz A-Class
The 2019 BMW X4 (G02) boasts an updated exterior and tech-heavy cabin. Physically, the SUV has grown in size and is now three inches longer than its predecessor, and this means more legroom for rear passengers as well. This X4 is scheduled to be out in dealerships sometime in July, but rendering artists have already gone to work on imagining an M version of this.
The rendering artist who created the X4 M is none other than X-Tomi Design. At first glance, you will notice that the more hardcore variant gets a lot of obvious cues from the base model - including the dual kidney grille and the sloped roofline. But it also gets some added elements that make it extra unique.
Instead of the original chrome grille inserts, the BMW X4 M’s had been blacked out. The lower air vent on the grille is now larger and more defined. Each corner is accented by two smaller vents, each one embedded with LED running lights. Its entire body has been lowered to the ground, while the roof has a carbon fiber treatment finished in black - overall, making it look more aggressive.Read the entire article BMW X4 M rendered, gets closer to the ground and is more aggressive
Recently, Mercedes-Benz announced that their new compact family will have at least 8 members. That’s a lot to swallow but we never really considered the A-Class would be associated with the Maybach sub brand.
But apparently, its inclusion makes sense to one artist, and that is Aksyonov Nikita. He rendered something that he calls the Mercedes Maybach A-Class. Of course, he took inspiration from no other than other Maybachs in Mercedes’ range - and by looking at his creation, all we can say is that it looks interesting.
The most obvious element in this rendering is the paint. We think that Nikita got this shade of blue from the Mercedes-Maybach 6 Cabriolet Concept, except that it has a matte finish instead. Moreover, its front grille as well as the eye catching multi-spoke rims seem to also come from the same model.Read the entire article Mercedes-Maybach A-Class rendered... because why not!
What is the first thing that comes to mind when you see a mid-engined European sports car? Well, that depends on who you are talking to. Some will look at it as a piece of art, while others would see as an opportunity. An opportunity for what, you ask? Well, an opportunity to imagine something even greater.
Yup, the 911 RSR that, without a doubt, is the fastest and most mind-blowing production 911 ever built - with a 4.0 liter naturally aspirated flat-six ahead of the rear axle. As for performance, it can chase its 9500 rpm redline like that of a 510 horsepower, race tuned flat six. This does not even have turbos that will soften throttle response.Read the entire article Porsche Cayman RSR race car gets rendered
Today, what is considered to be the best track-only Ferrari model is probably the FXX K Evo that is based on the LaFerrari. Before that model came out, the most hardcore model was the FXX K. But no matter how cool you would be to own any of these two, both of them are not road legal.
It would be the fulfilment of every car enthusiast’s wish to see the FXX K or Evo going through modifications to become road legal just like models such as the McLaren P1 GTR and Aston Martin Vulcan.
We have yet to see Ferrari confirm such a plan but an artist has already done this virtually. From Aksyonov Nikita of Behance comes a rendering of a street legal FXX K Evo. It looks very similar to the track only version. The minor differences are mostly found on the front fascia. Imagine yourself taking this Ferrari out on the road.Read the entire article Street-legal Ferrari FXX K Evo is digitally imagined
Supercar makers such as Ferrari, Lamborghini, and Lotus, at some point, have already stated that they would produce SUVs. While McLaren has not joined the bandwagon, it likely won’t be holding out for long if it wants to make loads of money like the rest of them. But there is another automaker that has not been mentioned a lot in this discussion of SUVs, and that is Bugatti.
For the longest time, Bugatti denied the idea of creating both a sedan and an SUV. One reason is that it is difficult to imagine an SUV with the same performance DNA found in models like the Veyron and Chiron. However, there is one artist that threw caution to the wind and imagined a Bugatti SUV that bears some Chiron design elements. Aksyonov Nikita is that artist. His rendering of the French performance SUV looks amazing and actually looks ready for the year 2020.
These photos were first published by the artist on his Behance page, before it circulated around the internet. He is also known for rendering a lot of other cool cars like a Porsche 918 Spyder among others.Read the entire article Bugatti is adamant it won’t produce SUVs but this rendering makes us want it even more
Check out this Ferrari S2 Concept that none of us can get our hands on. Why, you ask? Well, because it only exists in the virtual world. It was designed with aggressive lines, together with huge wheels, and bulky fenders. Now, doesn’t that make you wish it could come to life? Just imagine how quick this car could be when doing laps.
It was designer Sachin Zakarde from Mumbai, India, who created this so called S2’s design on his Behance page, and as you can see, it has a lot of carbon fiber components - from the side skirts, the wheels and even the roof. Speaking of the design, its nose will remind you of a Formula One car, with it being a little suspended, as well as the half rear wing it has got. As for the rear wing, we don’t know the real purpose of it but it does not really take anything away from the concept’s overall aggressiveness.
What’s odd is that the design of this car may have been considered too futuristic a few years back, but in fact, this S2 Concept actually looks wilder than the LaFerrari. Wild in a good way though.Read the entire article This Ferrari S2 design study looks perfect for the tracks
A vehicle with an SVR badge is considered as a special vehicle with higher levels of performance. Not all Jaguar and Land Rover vehicles have received the badge, and one of these unfortunate models is the Jaguar XF midsize luxury car (saloon and estate). But for now, people could stop dreaming about the Jaguar XF SVR. However, it is interesting to see how a Jaguar XF SVR would look like even on paper.
Thankfully, there is someone – an automotive designer named Aksyonov Nikita of St. Petersburg, Russia – who might be able satisfy that interest. After all, Nikita has already rendered an SVR version of a 2017 Jaguar XF saloon. Since it is just a rendering, this model – the 2017 Jaguar XF SVR – could only remain in the imagination of people longing for a high-performance version of the saloon. Nonetheless, the rendering by Nikita shows how the Jaguar XF SVR might look like – with more black details, a rear wing, a front lip spoiler, quad exhausts as well as other details that makes this higher performance version look sportier and faster.
Jaguar and Land Rover models that have received the SVR badge from the Special Vehicle Operations (SVO) are vehicles considered to have reached the pinnacle of performance as defined by Jaguar Land Rover and with attributes like power, handling and speed. If the Jaguar XF is to receive that badge, there is a need to justify why it has to bear the SVR name. But the sad thing is that even people at Jaguar are thinking that the XF won’t need the badge. However, it is incorrect to think that the Jaguar XF doesn’t really deserve the SVR badge; it is only that there are other vehicles in the brand’s stable that are on the priority list.Read the entire article Jaguar XF SVR gets rendered
Not long after Lamborghini unveiled the new Urus super sports utility vehicle, an automotive graphic artist made a rendering of a coupe-styled version of the SUV. It simply re-imagined the Urus four-door as a two-door coupe SUV, and the resulting rendered image is spectacular. Now, the same graphic artist has rendered the new Lamborghini Urus, not as a super SUV, but as double-cab pickup truck.
While it would be very hard to imagine Lamborghini creating a pickup truck, the newest rendering of the Urus as a full-size pickup truck is as equally tantalizing to the eyes as the coupe-style version. After all, both renderings were made by the designer who went by the professional moniker of X-Tomi Design.
In creating his pickup truck rendition of the Urus, X-Tomi employed an image showing the original super SUV in its profile. Upon closer inspection, X-Tomi didn’t touch the design of the Urus from the front end to the A-pillar – everything remains the same at this section. On the whole section starting from the A-pillar to the B-pillar, there aren’t so many design changes, except for the front window now larger on the pickup version. This is because the rearward slope of the slanting roof has been made less steep. The roof now also features a rack for added practicality.Read the entire article Lamborghini Urus super-SUV is re-imagined as double-cab pickup truck
Volkswagen strong sellers like the Golf and the Passat have their Alltrack versions, which offer a sportier driving experience with an all-terrain capability and rugged looks. But another VW strong seller, the Polo supermini, doesn’t have an Alltrack version. Nonetheless, a Brazilian automotive designer is providing Polo fans an idea of how an Alltrack version of the supermini might look like.
Essentially, VW employs the Alltrack moniker to identify derivative models that cater to urban customers with active lifestyles. These customers are people who spend the weekdays in the city, and the weekend off the road. This is why all of VW’s Alltrack models are fitted with an all-wheel drive system. VW distinguishes the Alltrack versions from their base vehicles by making them appear rugged.
Here comes a detailed rendering of the VW Polo Alltrack, as created by Kleber Silva of Sao Paulo, Brazil. This isn't the first time an Alltrack version of the Polo has been rendered visually, but Silva’s work is certainly worth considering.Read the entire article Brazilian designer renders 2018 VW Polo Alltrack to suit the outdoor lifestyle
The unveiling of the Lamborghini Urus is considered as one of the automotive milestones achieve this year. Not only is the four-door Urus the company’s first sports utility vehicle, it is also regarded as the first super SUV in the world. It looks great and stunning in this four-door configuration, which is essential if you are trying to mix super performance and practicality.
Nonetheless, there are customers who would like their Urus super SUV to look more aggressive, with a styling that fits its super performance nature. Thus, some are trying to imagine the Urus as a coupe-styled SUV – with two doors and a longer bonnet. But if that is somewhat hard to imagine, an automotive graphic artist who goes by the professional moniker X-Tomi Design has just created a rendering of a coupe-styled Urus. It was a simple re-imagination of Urus four-door as a two-door, but it looks astonishing.
At first glance, the visual tweaks that X-Tomi implemented on the Lamborghini Urus entailed the removal of the two rear doors that allow access to the rear passenger cabin of the SUV. Furthermore, the bonnet of the Urus was seemingly made longer. Other than these, it appears that everything from the base of the A-pillar and the tip of the bonnet where it meets the windshield have been shifted to the rear.Read the entire article Lamborghini Urus rendered as coupe-styled super SUV
Mercedes-Benz has officially released the pricing details of the new 2019 CLS. The base variant is the CLS 350d 4Matic that’s equipped with the inline-six rated engine and comes with a displacement of 2,925 cc and an output of 286 hp with maximum torque measured at 443 lb.-ft. This has been priced at $80,176 (€68,127.50) for the German market.
Much like the base model, the CLS 400d 4Matic is fitted with the same diesel engine although it has been tuned to offer more power at 340 hp having peak torque of 516 lb.-ft. Acceleration from 0 to 62 mph is at 5.0 seconds, faster than the 5.7 seconds offered by the CLS 350d 4Matic. The CLS 400d 4Matic is priced beginning at $85,330 (€72,507.70).
Those who want a petrol-powered version can choose the CLS 450 4Matic with is equipped with a 3.0-liter engine. Maximum output is 367 hp with top torque of 369 lb.-ft. It can go from 0 to 62 mph in 4.8 seconds. Mercedes-Benz has given this model a starting price of $83,445 (€70,906.15).Read the entire article 2019 Mercedes-Benz CLS is priced from €68,127, set to start selling in Germany this March
Fans and enthusiasts of the Mercedes-Benz CLS don’t have to endure anymore the teasers over the upcoming third generation of the four-door coupe. This is because Mercedes Benz has finally unveiled the next generation of the CLS four-door coupe – now more impressive and more intelligent – at the 2017 Los Angeles Auto Show.
The third generation of the CLS coupe is underpinned by the MRA (Modular Rear Architecture) platform, which means it has some similarities with E-Class sedan. However, the driving experience provided by the CLS coupe is different, since it boasts of a sportier chassis tune. Compared to its predecessor, the new 2019 Mercedes-Benz CLS coupe has its length extended by 2.0 inches while its height has been shrunk by 0.5 inch.
Nonetheless, the new generation coupe is easily recognizable as the CLS, but is now influenced by the carmaker’s Sensual Purity design language. Its front end is defined by the diamond grille common with Mercedes coupes, with a single louver. Now, the contours of the grille are similar to those of the grille on the Mercedes-AMG GT. Dynamically following these contours while bordering the grille are very flat and wide LED headlamps with inward-slanting flanks.Read the entire article 2019 Mercedes-Benz CLS four-door coupe is on display at 2017 LA Auto Show
Did you film an important event?