sportback, scale model
List of News and Information about sportback and scale model on 4WheelsNews.com
News and Information about sportback and scale model
Read the latest news and information about sportback and scale model published on 4WheelsNews.com! View comments and pictures about sportback and scale model on 4WheelsNews.com!
You also might be interested: audi, audi a7, next generation, sportback, scale model, mclaren, mclaren senna, audi rs5, new york auto show, coupe, united states, audi a5, audi s5, abt sportsline, audi rs7
We are all aware that Audi has plans to reveal the 2018 A7 Sportback soon, specifically towards the end of the year. Though we expected a grand reveal and a full-sized vehicle, we were surprised by something much smaller - that is, a die cast scale model of the Sportback.
What just happened? Well, Autoweek.nl has leaked an image of the A7 Sportback, except it isn’t the real car. Rather, it is a scale model, which makes it much smaller than what all of us expected to see. Of course, this can’t beat the awesomeness of the real model. In earlier spy shots, the A7 and S7 will have a design that mixes together elements from the first-generation car combined with the Prologue series of concept cars.
Though the leaked image just shows a scale model, we could still kind of tell how the A7 Sportback will look. The A7’s face resembles that of the A8, and we already know that based on the spy shots we have seen before. What’s new is the fact that the scale model shows us a more sculpted hood and more body lines. The A7 has a wider single-frame grille, thin headlights backed with an array of LEDs, and more glass on the sides.Read the entire article Scale model of 2018 Audi A7 Sportback leaks ahead of official model unveiling
The McLaren Senna is indeed an attractive proposition from the British carmaker. While its £750,000 tag price and limited production run of just 499 examples makes this new Ultimate Series very hard to acquire, it is quite possible to have a Senna displayed in a fan’s house or room. This is by availing of highly detailed McLaren Senna scale models from Amalgam Collection.
At first glance of the image of Amalgam’s McLaren Senna, it would be easy to mistake this as the actual supercar. But once the actual replica is seen, reality strikes that this is just a 1:8 scale model. It is so detailed that the Senna mini replica could easily deceive and stun anyone who looks at it. From the front end, the cabin, the flanks, side mirrors, the wheels to its rear section, rear fascia and massive rear spoiler, the miniature Senna looks very much the same as the original model – except for the size.
As a 1:8 replica, it means that every centimeter (or any unit of scale) of the miniature McLaren Senna corresponds to around 8 cm (or any applicable unit) of the full-scale model. The original Senna has a length of 4,744, while the 1:8 replica measures at 600 mm. To achieve the dimensions and stunning appearance of the replica, Amalgam Collection employed CAD (computer assisted design) data sourced from none other than McLaren Automotive. To ensure that the mini Senna accurately represents the full-scale original supercar, McLaren engineers and designers had the replica completely undergo a full vetting process.Read the entire article Amalgam Collection is offering an accurate mini replica of new McLaren Senna
It has been quite a long wait for the 2019 Audi RS5 Sportback. For a time, all we’ve had to look at was its placeholder, the RS5 Coupe, which is now available throughout dealerships in the United States. Now, we have finally seen the larger and more sophisticated version of the said model, and it is stunning.
Physically, the RS5 Sportback model stretches out a little more compared to the standard coupe. The hips have been made wider by over half an inch (15 millimeters) on each side, and it has also been made lower by .28 inches (7 millimeters) making it sit closer to the ground. What finishes off the look would be the bigger wheels (of either the standard 19 inches, or the 20 inch wheels that come as an option) and larger air intakes.
Overall, the RS5 Hatchback looks a bit more aggressive than the average coupe. Customers could get the Sportback in any of the Gloss Black, Carbon, and Matte Aluminum optic packages.Read the entire article 2019 Audi RS5 Sportback brings aggressive look and 444 hp engine to New York
Scott Keogh, President of Audi of America, said in his interview with Roadshow that the United States market will again be able to get their hands on a RS5 Sportback that will soon join the RS5 Coupe. It took a while for the automaker to mention the existence of a range-topping variant of the stylish four door. Information on its availability in different regions has also not been divulged yet.
But that is not all. In fact, Keogh mentioned that they have another surprise that they are working on, though he stopped himself from saying further and did not reveal what it was. Instead, he teased us by saying that there is a cool European model that they have not brought in to the United States just yet, and that he considers it to be his number one car, and they perhaps they will get it. But to date, he did not confirm any of these reports.
If you analyze what Keogh said even further, there are a number of possibilities for this. Keogh could be referring to an RS4 Avant, depending on the timeframe he has in mind. That is because the said model is already ready right now and that it only needs an executive to sign off so it could already be added to the US lineup. The only problem here is that it might take 25 more years for this model to become eligible for US import.Read the entire article Audi’s US lineup will include RS5 Sportback and Coupe
The Audi RS5 Coupe is a real stunner with its athletic looks and sporty performance. Regarded as a Gran Turismo among RS models by Audi Sport’s chief executive, the Audi RS5 Coupe offers 450 hp (336 kW) of max output and a 442 lb.-ft. (600 Nm) of peak torque, as derived from a 2.9 liter bi-turbo V6 engine. Getting a top-down version of the Audi RS5 Coupe is out of the question for now, but the good guys at ABT Sportsline are willing to offer a beefed up variant of the Audi S5 Cabriolet.
It is not exactly the RS5 Cabriolet, but ABT Sportsline’s creation is close – the ABT S5 Cabriolet. The most fundamental change made for the S5 Cabriolet is its power rating. As standard, a typical Audi S5 Cabriolet is powered by a 3.0-liter V6 turbo engine that could deliver 354 hp (260 kW) of max output and 500 Nm of peak torque.
That’s nowhere close to the power rating of the dynamic mill inside the RS5 Cabriolet. However, the German tuner’s ABT Engine Control (AEC) made this already powerful engine become more dynamic, with the output and torque levels surging to 425 hp (313 kW) and 550 Nm, respectively. ABT Sportsline is also making this power tweak available for other body variants of the Audi S5.Read the entire article ABT Sportsline boosts looks and performance of Audi S5 and A5 Sportback
Last week, Audi’s luxury sportback, the 2019 Audi A7 made its debut. It isn’t only sleeker than its predecessor, but it is overall more refined too. After making its first public appearance, A7 fans quickly got to work and began rendering the said model, giving it even more performance cues. One of the renderings we noticed was that of a German artist named Tobias Büttner. Digitally, he gave the new A7 added RS performance pieces and it looks pretty mean.
Beginning with the front fascia, the new angular grille has been upgraded into an RS performance part. The standard base model comes with vertical slats, which have been changed into a honeycomb-style plastic mesh, the same with the side vents too. The front fender now gets a “Quattro” logo that’s displayed on the front fender, while the RS badge can be found on the grille.
As you can see in the photos, the 2019 Audi A7 rides on a new set of wheels that has been borrowed from the RS5 Sportback. The rear now has a more aggressive diffuser that has been given massive dual exhaust tips. To cap off the exterior look, the car has been lowered, and has also been finished in Audi’s signature Nogaro Blue paint job - making it look sportier than the standard model. The package may not look very dramatic overall, but it looks like it is ready for production.Read the entire article Artist renders this 2019 Audi RS7, and it looks so powerful
Have you ever wondered what you can you buy with $9,365 in your pocket? Well, you have quite a lot of options. In fact, you can even purchase a used vehicle and perhaps modify it to build a super fast car. On the other hand, you can get this scale model of the Bugatti Chiron’s powertrain.
This 1:4 scale model of Chiron’s 8.0 liter quad-turbocharged W16 engine and seven-speed dual clutch transmission is created and built by Amalgam. The real powertrain, on the other hand, measures 18 inches long and nine inches high.
You are probably wondering what makes it so expensive. Well, Amalgam claims that they took 2500 hours just to design everything, and that does not even include building it. Building each example took them around 220 hours using a total of 1,040 individual pieces.Read the entire article Would you buy this 1:4 scale Amalgam Bugatti Chiron engine for $9,365?
The Audi A7 Sportback, whether you would like to call it a sportback or a four-door coupe, has always been a beautiful car. And this week, the 2019 model year will be debuting in Germany with an even more striking appearance since we first saw it seven years ago.
Beginning with numbers, it is a bit shorter than its predecessor at 195.6 inches long, and is now only 55.9 tall, so it appears to sit closer to the ground. Unlike the A8, it has a wider face and a lower grille, giving it a sportier appearance. The hood now has lines that lead to the broader front fenders. Like its predecessor, it has got a sleek roof that seamlessly plunges toward a pop-up spoiler. As for the trunk capacity, there is 18.9 cubic feet of storage that can be maximized to 49.1 cubic feet when the seats are folded down. The rear end gets one full-width tail light that stretches from one end to another, and is made up of 13 individual LED strips that varies in height across the width of the trunklid. Customers will be able to get wheels as large as 21 inches in diameter.
With a stylish exterior comes with a stylish cabin as well. It is light and airy with plenty of horizontal lines up the dashboard and door panels. In fact, the 2019 A7’s interior resembles that of the new A8. Despite its shorter length, passengers get an increase in headroom as well as rear knee space, thanks to the extra 0.8 inch interior length. A7 buyers will be able to choose from a five-place or a 2+2 seating option.Read the entire article 2019 Audi A7 Sportback retains much of the A8’s appeal
The Ferrari 812 Superfast may be one of the fastest cars you’ve seen or will ever see in the automotive industry. Given its 6.5 liter V12 engine, the Superfast can carry out as much as 800 horsepower (588 kilowatts) and 530 pound feet of torque. It can also do the 0-100 kilometers per hour sprint in just 2.9 seconds before hitting its 211 miles per hour (340 kph) maximum speed. But the reason why it can perform that well, and fast is because of its sleek design.
Ignacio Albera was the man behind the 812 Superfast when it comes to the design. The model first made its debut earlier this year at the 2017 Geneva Motor Show as the successor of the F12Berlinetta. This example went through several and extensive aerodynamic testing that includes going through the wind tunnel, and now the company is putting this scale model up for auction as it heads to the RM Sotheby’s Leggenda E Passione sale.
The 812 Superfast scale model that is being offered to the public does not have the V12 engine. It also doesn’t have the drivetrain and the steering wheel. This scale model had been finished in hand-sculpted carbon fiber and some “prototype materials”. So why would history buffs and collectors want it? This half-scale model was used when the 812 Superfast car was being developed. That included testing of computational fluid dynamics results in the wind tunnel. Furthermore, it maintains its original modularity that was used to optimize the aerodynamic properties of the body.Read the entire article Ferrari 812 Superfast wind tunnel scale model will be auctioned off
Nissan’s GT-R Nismo is one of the most expensive cars the Japanese automaker has made in its history, the 200 mile-per-hour supercar is not like any other Nissan car that everybody can get their hands on. However, Lego has fulfilled our dreams to own one to a certain extent, by designing a small-scale version of the Nismo supercar. The nice thing about this is that you do not have to know how to drive to own one.
It was Firas Abu-Jaber, an expert brick builder, who came up with the Lego version of the GT-R Nismo. The reason why he built this was because it is a favourite car of his, so he took time and studied the supercar, and went into proper detail - from the front fascia, wheels, the rear, and even under the hood, to start his project. What he built was so detailed that he even replicated the GT-R’s engine.
As usual, Firas made use of the red Technic gear pieces to add details like the tail lights according to The Brothers Brick website. As you open the hood, the doors, and the roof, you will find some pretty cool detailing inside like a full on interior. This brick model might be of interest to you, but you won’t be able to get this from your local Lego store as it is not an official kit.Read the entire article Expert Lego builder creates small-scale Nissan GT-R Nismo
Audi currently does not have any fully electric model that they can call their own after the R8 E-Tron has been discontinued last year. But this year, they showed us concepts of the E-Tron Quattro and the E-Tron Sportback (at Auto Shanghai), and the good news is that the zero-emissions SUV will finally begin production at their Brussels, Belgium factory. The SUV will then be followed by its sleeker counterpart, the Sportback, in 2019.
What sets the E-Tron Sportback apart from the others is the fact that it is a “four-door gran turismo”, with a powertrain of 430 horsepower (320 kilowatts) at standard, and an impressive 496 horsepower (370 kilowatts) when the boost mode is activated. In just four and a half seconds, it can hit 62 miles per hour (100 kilometers per hour). That’s very impressive for a full electric vehicle, but we shouldn’t be too excited until the production model has been tested, and that’s a long while from now.
In today’s world, there is this thing we call “range anxiety”. It simply refers to the stress or anxiety that people who own EVs get, knowing that their car runs on battery power, and that it can simply shut off when the battery gets drained. So the issue is whether they would get to their destination before they’ll have to recharge their vehicles, especially for long distance drives.Read the entire article Audi E-Tron Sportback confirmed to hit production in 2019
The largest gathering of Volkswagen and Audi cars in Europe is underway, and the German premium carmaker is displaying the third model of its G-Tron range at the 2017 Worthersee Meeting wrapped in special finish and with apparent aesthetic tweaks.
Audi unveiled the production version of the new Audi A5 Sportback G-Tron at the 2017 Geneva Motor Show in March. Before the model’s eventual introduction to the market in early summer, Audi is making sure that the new G-Tron car gains more attention from the public by showcasing a one-off variant at the Worthersee Meeting.
The A5 Sportback G-Tron at Worthersee sports a customized two-tone exterior to make it more appealing. However, it isn’t a fully modified unit, unlike the VW GTI First Decade concept that is also being displayed at the event. Around two-thirds – starting from the front end -- of the exterior of this one-off A5 Sportback G-Tron is wrapped in dark grey finish. It then blends with a honeycomb blue finish on the rear side doors. This finish completely dominates the rear end of the one-off A5 Sportback G-Tron.Read the entire article New Audi A5 Sportback G-Tron in special wrap seen at 2017 Worthersee Meeting
A couple of days ago, Audi announced an update in terms of the pricing of their 2018 lineup. With the price increase, several models will have more features as standard equipment while there will be more models that will have sportier interior and exterior design packages.
The Audi A3 Sportback E-Tron had always been a successful model since it was first released in the United States. Sales charts of the said model from January 2016 up until March this year indicate that the model is doing well. In fact, the model made up around 13 percent of all Audi A3 sales in its first eight months, and by last December, the percentage went up to 20 percent.
The 2017 model was first sold with a price tag of $37,900, and it soon increased to $38,900. And naturally, there will be a price increase for the 2018 year model, with the Premium trim at $39,500, the Premium Plus at $42,600, and $48,100 for the range-topping Prestige. That is about $600 to $1,300 more than the previous model.Read the entire article There has been a noticeable price hike for the 2018 Audi A3 E-Tron
Audi is now working on an all new A7 Sportback along with the new the RS7 and S7 variants. That said, it’s still a couple of years more before an RS7 will come strutting its way into the showrooms.
While waiting, Peisert Design has a vision of what the next Audi RS7 would look like. Taking its cues from the spy shots and leaked images of the new A7, the designer has adopted the same edgy design into the creative visual art which includes Audi’s more aggressive front grille and pointed headlamps.
While the rendering artist hasn’t touched the current model’s rear diffuser and tailpipes in oval shape, the redesigned tail lamps has been extended all the way to the Sportback’s wider rear end. Aside from these, Peisert has imagined the new RS7 to come with larger air intakes which is also flanked by black chrome lower lip at the front.Read the entire article 2019 Audi RS7 gets rendered
Amalgam Collection, started in 1985 is known for creating perfect scale replicas of modern cars. Owned by England’s leading architects, the company works with the manufacturer and their design team while using original CAD data to perfect the work of the exterior and interior details of the replicas.
Amalgam Collection could easily be compared with the makers of fine watches like Richard Mille, as they put passion into car modelling more than everybody else - and we can see this through the precision and the accuracy of each replica they make. This is the reason why we put an emphasis on the word “perfect”.
The company based in Bristol, England, announced that they have something special for the upcoming 70th anniversary of Ferrari. To be more precise, they don’t have one, but 350 “something specials” instead. So what are these surprises you ask? These limited edition mini-Ferraris with 70 colour combinations and designs from Ferrari’s history are simply to die for. The five modern models that will be replicated are: the 488 GTB, 488 Spider, California T, F12 Berlinetta, and the GTC4 Lusso.Read the entire article Amalgam creates 350 limited edition 1:18 scale models for Ferrari’s 70th anniversary
Two years ago at the 2015 Frankfurt Motor Show, Audi presented the E-Tron Quattro to the public. This gave us an idea that they will soon be producing crossovers. The Quattro will be moving into production by 2018, and a year later, a coupe version of it will follow. This crossover-coupe they call the E-Tron Sportback made its debut at the Auto Shanghai in China just this week, along with two other electric concepts from competitors: the VW I.D. Crozz and the Skoda Vision E.
Similar to Volkswagen I.D. Crozz, Audi’s E-Tron Sportback also features light emitting diodes. The four-rings brand not only equips this new concept with full LED headlights and taillights. It also gets an illuminated Audi logo. Instead, it is supposed to have approximately 250 extra LEDs located around the front bumper, precisely on both sides of the corporate singleframe grille. But these lights do not only have one purpose - they are made to communicate with other cars on the road forming different light patterns - from shapes to numbers as seen on its concept video debut.
The E-Tron Sportback isn’t just about smart LEDs. At 4.9 meters long, 1.98 meters wide, and 1.53 meters tall, this coupe has a strong electric powertrain that can produce as much as 430 horsepower (320 kilowatts), and can reach a peak of 496 horsepower (370 kilowatts) when the boost mode is activated. Taking only 4.5 seconds, this little EV can accelerate up to 62 miles per hour (100 kilometers per hour) from a standstill.Read the entire article Hi-tech Audi E-Tron Sportback concept has over 200 LED lights
Audi has been delighting fans and critics alike with teaser videos of its newest concept fitted with numerous LEDs. The German automaker is back to show off a more “substantial” preview of its latest creation – now complete with a name and a few adjacent sketches, enough to reveal its body style and a few exterior features. Ready to know more about it? Here goes.
We’ve come to know that Audi’s latest creation is called the Audi E-Tron Sportback Concept. However, despite being called a “Sportback,” we’re expecting this concept car to be a crossover-coupe combination. From the photos released by Audi themselves, we can conclude that the E-Tron Sportback Concept isn’t just a typical hatchback like the A3 Sportback as it’s something far better.
As expected (and as depicted in design teaser sketches), the concept is fitted with a set of oversized wheels. Its heavily sloped roofline ending is reminiscent of a coupe but accentuated by an interesting spoiler which features two arches on both sides. The E-Tron Sportback does without the conventional side mirrors (also an expected move), with cameras on its stead, giving the concept car a sleeker look.Read the entire article Audi teases us with image of new E-Tron Sportback Concept ahead of Shanghai Auto Show
It has been revealed that Audi Sport is setting up the final touches on what could be the newest member of the brand’s RS range. This comes just after Audi unveiled at the recently concluded 2017 Geneva Motor Show the new 2018 RS5 Coupe. Spotted lately has been the RS4 Avant which is undergoing the final stages of testing.
The question on everyone’s mind right now though is what is going to follow the RS4 Avant. X-Tomi Design though has presented a possible rendering of a Sportback version and even a RS5 Shooting Brake. The latter however is done more out of fun as there is little or no possibility that it will ever be developed.
To be clear though, Audi did not say that it will be coming out with a RS5 Sportback. However, fans have seen a dealer presentation conducted in Norway showing that this version is presently included in the pipeline. In the same presentation, it was also disclosed that the RS5 Coupe is expected to be in assembly lines by June. The RS4 Avant is then expected to be in the assembly line by December with a potential premiere during this September’s Frankfurt Motor Show. Should the brand proceed with the RS5 Cabriolet, or even the RS5 Sportback, either one could arrive sometime in 2018.Read the entire article 2018 Audi RS5 rendered as a shooting brake, cabrio and sportback
Say goodbye to Buick Regal Sedan, and say hello to Buick's newest offers. In 2018, the upscale automobile company is having an overall haul by offering a midsize Regal SportBack with coupe-ish styling and the Regal TourX, which is a crossover but we can also safely call it a wagon.
It has been a running fact that the American consumers’ love for sedans is sadly declining. But it's far from extinction as more than 3 million midsize vehicles have been sent off by dealers in 2016. And since the trend is crystal clear, General Motors decided to act on this pattern. The Buick Regal sales of 20,000 for the last 2 years seems to be more impressive than most, but just barely.
Buick is known for its conservatism, but with the 2018 Regal, General Motor's luxury stamp is taking things to a whole new level. With no competitive sedan in sight, consumers can choose between the newcomers, the 2018 Regal Sportback and TourX. Rather than a 4-door sedan shaped vehicle, the Regal Sportback will sport a liftback design akin to the Audi A7.Read the entire article 2018 Buick Regal reinvented, will be available as Sportback and TourX
Audi refreshes its portfolio as its go-faster division officially announces the release of six new RS models by the end of 2018. That’s quite a huge number of cars to develop simultaneously. Now, should main competitors BMW and Mercedes-Benz be wary of Audi’s upcoming projects?
Ex-Lamborghini boss, and now Audi Sport’s CEO, Stephan Winkelmann confirms this news in an interview with Car & Driver, just after saying that he was not interested in developing the Sports Quattro and had other things to focus on. He continues by saying that they are working on a crossover that is due in no time. Here, he refers to the upcoming Q-badged models that will top the current RS models.
So let us discuss these models one by one. Although Winkelmann did not specify which SUVs, it’s not that hard to guess. In fact, the company did mention in 2015 that an RS Q5 and Q7 would be a good idea. Other than that, they did release a concept earlier this month at the Geneva Motor Show, which they called the Q8 Sport Concept. Therefore, this may already be hinting at a possible RS version of the unreleased SUV.Read the entire article Six new Audi RS models are on the way
Did you film an important event?