Alpina B6 xDrive Gran Coupe BMW CCA Edition was made as a raffle prize

Article by Christian A., on October 5, 2017

BMW’s Alpina B6 xDrive Gran Coupe is no doubt one of the most desirable models out there considering that it comes with almost the whole package. From a head-turning exterior design, impressive power, practical features, and an upscale interior. Depending on how you are feeling, it can be sporty when you want it to be, or it can be the most relaxing cruiser to drive you out of the city without breaking a sweat. And since the Alpina has been pretty successful since it first came out in 2014, the company joined forces with BMW again to create this special edition B6 Gran Coupe.

This one-of-a-kind model has been given quite a lengthy name as the “BMW Alpina B6 xDrive Gran Coupe BMW CCA Edition”. This model was especially made for an upcoming raffle that had been organized by the BMW Car Club of America. On the outside, it wears a signature Blue Metallic paint that represents Alpina, matched with a lovely white leather interior with piano black accents all over.

There is more to the four-door grand tourer’s interior. There are a number of silver inscriptions against a high-gloss lacquer finish on the center console too, while the steering wheel is hand-finished and comes with white stitching details to complement the seat upholstery. This is also why the Alpina B6 gets white piping on the floor and a set of trunk mats. To finish off the look, Alpina put B6 embossed logos onto the headrests.

Under the hood, the engine gets a one-off plaque and signatures of Burkard, Andreas and Florian Bovensiepen. These are the guys behind Alpina. The automaker gave the B6 Gran Coupe a biturbo 4.4-liter V8 engine with 600 horsepower and 590 pound-feet (800 Newton-metres) of torque. This enables it to sprint from 0 to 60 miles per hour (0 to 96 kph) in 3.6 seconds, before continuing on to hit a maximum speed of 198 mph (324 kph).

This one-off model also comes with an Akrapovič exhaust system, made of only titanium. Thus, it dropped 15 pounds (6.8 kilograms) over the standard setup. The one-piece exhaust system measures around 12 feet (3.6 metres) from the downpipes to the quad tailpipes at the back.

At over $130,000, you can get the bespoke Alpina B6 Gran Coupe that has features that you cannot get from the US-spec model. However, this is not being put up on sale but will be raffled out instead by BMW CCA. Other prizes that are included in the raffle include an M2 as the first prize and an M240i as the main prize. As they sell over 5,000 tickets, another M240i will be added to the raffle. The lucky winner who will bring this special edition Alpina B6 Gran Coupe home will be selected this October in Georgia.

Press Release

The BMW ALPINA B6 xDrive Gran Coupe BMW CCA Edition – One Of A Kind.

Introduced in 2014 in collaboration between BMW and ALPINA, the four-door Coupé with xDrive has been widely recognized for its aesthetic beauty, epic driving performance and balanced handling.

Powered by a bespoke 4.4 liter V8 Twin-Turbo engine which delivers 600 bHP at 6000 rpm and a maximum torque of 590 lb-ft at only 3500 rpm, the BMW ALPINA B6 xDrive Gran Coupe offers supercar like performance. Accelerating from 0 to 60 mph takes just 3.6 seconds and a top speed of 198 mph can be reached.

The sleek silhouette of the four-door body shape is both sophisticated and sportive, unique exterior ALPINA design elements set distinguishing accents, such as iconic ALPINA CLASSIC wheels, and provide aerodynamic functionality – all in one stylish and elegant package.

The unique blend of jaw dropping performance, bespoke luxury and sublime comfort means the BMW ALPINA B6 xDrive Gran Coupe has become the choice of automotive connoisseurs who are attracted to its unique pedigree.

Together with BMW Car Club of America and BMW North America, ALPINA has decided to celebrate this success by creating truly one of a kind – the BMW ALPINA B6 xDrive Gran Coupe BMW CCA Edition.

Finished by master craftsmen at the ALPINA manufactory in Bavaria, this BMW ALPINA B6 xDrive Gran Coupe exhibits bespoke features which highlight its performance luxury character and the ALPINA ethos, making it truly-one-of-a-kind.

The BMW ALPINA B6 xDrive Gran Coupe BMW CCA Edition marks the pinnacle of the 2017 BMW CCA Raffle!

One Of A Kind.

The BMW ALPINA B6 xDrive Gran Coupe BMW CCA Edition is finished in a timeless and contemporary paint and upholstery combination – the exclusive ALPINA Blue Metallic perfectly offsetting the luxurious Merino Opal White Full Merino Leather interior.

ALPINA Piano Black trim features a special BMW CCA Edition silver inscription on the center console, which has been painstakingly handmade in a one-off production with a high-gloss lacquer finish.

The hand-finished ALPINA LAVALINA steering wheel features white bespoke stitching, which along with the floor and trunk mats with bespoke white piping, match the Merino Opal White Full Merino Leather interior. The headrests are subtly embossed with the ALPINA logo.

Besides the customary interior ALPINA production plaque with BMW CCA Edition 01/01 inscription, a truly unique production plaque can be found in the engine bay. This features the signatures of the Burkard, Andreas and Florian Bovensiepen – the father and son team behind the ALPINA family business.

The BMW ALPINA B6 xDrive Gran Coupe BMW CCA Edition’s titanium exhaust system is a technical masterpiece. Engineered as a complete one-piece exhaust system stretching over a length of approximately 12 ft from the downpipes to the rear tailpipes, it is made entirely of titanium and saves over 15 lbs of weight. The two twin tailpipes are finished with a carbon fiber trim.

BMW ALPINA B6 xDrive Gran Coupe BMW CCA Edition.

4.4 l V8 Twin-Turbo

0 – 60 mph in 3.6 seconds

198 mph top speed

- ALPINA Blue Metallic.

- Merino Opal White Full Merino Leather.

- ALPINA Piano Black BMW CCA / Burkard Bovensiepen, bespoke.

- Hand-finished steering wheel Opal White stitching, bespoke.

- Floor and trunk mat with Opal White piping, bespoke.

- ALPINA Logo embossed in headrests, bespoke.

- ALPINA production plaque in engine bay with signatures, bespoke.

- Titanium exhaust system, one-piece construction, light-weight, carbon fiber trim, made by Akrapovic.

* Bespoke content not part of regular BMW North America offering for BMW ALPINA models.

BMW Group In America

BMW of North America, LLC has been present in the United States since 1975. Rolls-Royce Motor Cars NA, LLC began distributing vehicles in 2003. The BMW Group in the United States has grown to include marketing, sales, and financial service organizations for the BMW brand of motor vehicles, including motorcycles, the MINI brand, and the Rolls-Royce brand of Motor Cars; Designworks, a strategic design consultancy based in California; a technology office in Silicon Valley and various other operations throughout the country. BMW Manufacturing Co., LLC in South Carolina is part of BMW Group’s global manufacturing network and is the exclusive manufacturing plant for all X5 and X3 Sports Activity Vehicles and X6 and X4 Sports Activity Coupes. The BMW Group sales organization is represented in the U.S. through networks of 344 BMW passenger car and BMW Sports Activity Vehicle centers, 153 BMW motorcycle retailers, 127 MINI passenger car dealers, and 36 Rolls-Royce Motor Car dealers. BMW (US) Holding Corp., the BMW Group’s sales headquarters for North America, is located in Woodcliff Lake, New Jersey.


Since 1965, ALPINA Burkard Bovensiepen GmbH + Co. KG, a family-owned business, has been producing exclusive automobiles based on BMW models and maintains a close and trusting partnership with BMW AG.

In 1983, ALPINA was accredited as an automotive manufacturer by the German Federal Motor Transport Authority (“Bundeskraftfahrtamt”). The combination of sophisticated and powerful drivetrains, dynamic handling, excellent long-distance comfort and best in class fuel efficiency is the hallmark of automobiles made by ALPINA. Each BMW ALPINA automobile is manufactured in collaboration with BMW production facilities where components engineered and supplied by ALPINA are installed - this ensures that the highest possible quality standards are achieved. Further manufacturing steps, the final assembly, test drive and pre-delivery check of every automobile take place at the company’s headquarters in the southern German region of Allgäu. Approximately thirty percent of today’s 250 employees work in research and development. At their disposal is a state-of-the-art engineering and development centre which offers the latest high-tech engine testing and diagnostic equipment. The demand for exclusive, personalised vehicles is growing globally, helping ALPINA achieve record sales in 2014 with over 1700 vehicles delivered worldwide. Of these, approximately only 400 vehicles are delivered to the USA and Canada annually.

Source: BMW

If you liked the article, share on:



It has been nearly eight years since Toyota entered a new era of sports cars when it officially unveiled the production version of the Toyota 86 – also known as...
by - February 27, 2019
The new Audi TT RS – yes, the top version of the German carmaker’s facelifted TT model series – is now officially here. If you could remember, the range-topping TT...
by - February 18, 2019
Nearly half a year ago when McLaren Automotive unveiled the McLaren 600LT Coupe, the British carmaker is now introducing a version that lets its passengers enjoy the thrill of an...
by - January 25, 2019
German carmaker Volkswagen is now making the latest evolution of the new Volkswagen Golf GTI -- the new Golf GTI TCR. First unveiled as a concept at the annual GTI...
by - January 24, 2019
It has been three and a half years since BMW unveiled the sixth generation of the BMW 7 Series. Thus, it is really about to give the 7 Series a...
by - January 17, 2019