Mercedes-AMG unveils 1,000+ PS Project One hypercar at 2017 Frankfurt Motor Show

Article by Christian A., on September 12, 2017

Ever since Mercedes-AMG announced that it was developing and building a new hypercar – the new Mercedes-AMG Project One -- that could deliver around 1,000 hp of power output, people have been anxiously waiting for the carmaker to finally unveil its of new offering.

Now, the long wait is over as the new Mercedes-AMG Project One – as a show car -- finally reveals itself to the global public at the 2017 Frankfurt Motor Show (IAA).

Prior to its formal unveiling, Mercedes-AMG has been dropping juicy details about the Project One. Now, at the Frankfurt Motor Show, the German carmaker finally spilled all the beans about the Project One, from its exterior, interior and aerodynamics to its performance and Formula One-inspired technologies.

Exterior Design

The exterior design of the new Project One is inspired by what is considered as the acme of motorsports – Formula One. This mid-engine concept has its every part influenced by function, resulting to a design marked by muscular proportions, forward-biased cockpit and large wheel arches as well as a wasp waist, an extended rear end and the absence of lines. Gorden Wagener, Chief Design Officer at Daimler AG, referred to the Project One as a perfect embodiment of Performance Luxury.

The front end of the Project One is defined by a large front fascia which has air inlets that extend across the entire width of the hypercar. The center section of the front end is marked by a white AMG logo while the Mercedes star can be found above on the hood. Just below the center section is the hallmark AMG A-wing that transitions into the front fenders. Large air inlets flanking the center section feature two black horizontal fins and are bordered by U- shaped flaps. The front end is also marked by flat LED headlamps, black air outlets on the hood and an automatically extending front splitter. The headlamps feature three rhomboid lighting elements, similar to the graphic design of the AMG brand logo.

On the other hand, the Project One features a low, spherical greenhouse with a characteristic window pattern. The roof line of the show car features an F1-derived black intake that guides large volume of air into the engine. This black intake transitions into the black, vertical shark fin that is designed to enhance lateral stability during high-speed cornering. Meanwhile, the rear window allows other people to take a good look at the hypercar’s unit. Aside from the F1-derived black intake, the Project One also employs two large NACA air inlets that send air for the engine and transmission oil coolers.

On the sides, the Project One features tautly recessed flanks as well as black carbon-fiber surfaces that could redirect the airflow around the body. The sides of the Project One also feature Petronas green paintbrush design as well as tight-fitting, muscular fenders. Interestingly, the doors of the Project One open forwards and upwards while the charge socket for the battery is located at the rear left and the fuel filler flap is at the rear right.

The rear end of the Project One is marked by a vertical spoiler lip, massive two-section diffuser, a two-stage extendible rear aerofoil, as well as a central exhaust tailpipe featuring large, round outlet and two further small round apertures derived from F1. The rear lights also feature three rhomboid lighting elements.

Interior Design

Meanwhile, the interior of the Project One employ a minimalistic and functional design, and is capable of carrying two occupants on its integrated bucket seats with adjustable backrests. These racing seats are in slip- resistant black microfiber with its surfaces are interspersed with nappa leather in magma grey and inlays in a sporty textile mesh.

A yellow contrasting topstitching is also apparent. The driver and the passenger are separated by the center tunnel. The Project One also features adjustable steering wheel – in Formula 1-style -- and pedals. The interior also comes with a seemingly floating dashboard as well as two high-resolution, free-standing 10-inch displays. Ensuring optimum visibility to the rear is a screen that shows real-time images of the rear from a mirror cam. This display screen replaces the rear-view mirror.

Powertrain

As for performance, this is ensured by a powertrain that includes one turbocharged engine and four electric motors (each offering 120 kW) – a high-performance plug-in hybrid drive system adopted directly from Formula 1. Driving the rear wheels is a 1.6-liter V6 hybrid gasoline engine -- with direct injection and turbocharger – as mounted ahead of the rear axle. One electric motor is integrated into the turbocharger while another is installed directly on the combustion engine. In this setup, the rear wheels could receive power output exceeding 500 kW (680 PS or metric horsepower). The other two electric motors are set up to power the front wheels. These front motors deliver around 240 kW (326 PS), bringing the total power output of the Project One to 740 kW (1,006 PS).

Providing juice to the electric motors is a lithium-ion battery pack with F1 technology. In fact, the lithium-ion cells, their arrangement and cell cooling system are the same as employed in the Mercedes-AMG Petronas F1 car, although the Project One hypercar has more battery cells for practicality.

The hybrid powertrain of the Project One -- allowing an electric range of 25 km or 16 miles – is complemented by a variable AMG Performance 4MATIC+ all-wheel drive with hybrid-drive rear axle, electrically driven front axle and torque vectoring. Power is sent to the wheels through an automated AMG SPEEDSHIFT 8-speed manual transmission. Mercedes-AMG didn’t say how quick the Project One could sprint from zero to 100 km/h, but it revealed that the hypercar could dash from nil to 200 km/h in under six seconds while achieving a top speed that exceeds 350 km/h (217 mph).

Press Release

World première of the Mercedes-AMG Project ONE show car: Mercedes-AMG brings Formula 1 technology to the road

The Mercedes-AMG Project ONE will celebrate its world premiere at the International Motor Show (IAA) in Frankfurt: for the first time, the two-seater supersports show car brings the very latest and efficient, fully-fledged Formula 1 hybrid technology from the race track to the road almost par for par to represent the highlight of AMG's 50th anniversary. This high-performance hybrid produces over 1,000 hp and reaches top speeds beyond 217 mph (350 km/h). The show car combines outstanding racetrack performance and day-to-day suitable Formula 1 hybrid technology with exemplary efficiency. This is a world first. The overall responsibility for the realization of Project ONE lies with Mercedes- AMG. The complex development work was carried out in close cooperation with the Formula 1 experts at Mercedes-AMG High Performance Powertrains in Brixworth and with the Mercedes-AMG Petronas Motorsport Formula 1 team in Brackley. Together with the four-door AMG GT Concept, the Mercedes-AMG Project ONE show car provides another insight into the future performance-hybrid drive strategy of the sports car brand within Mercedes-Benz.

Ever since the early days of motorsport, engineers have dreamed of bringing motor racing technology to the road. Mercedes-AMG is now making this dream a reality at the very highest level. "Motorsport is not an end in itself for us. Faced with intense competition, we develop technologies from which our production vehicles also subsequently benefit. We are drawing on our experiences and successes from three constructors' and drivers' world championships to bring Formula 1 technology to the road for the first time: in Mercedes-AMG Project ONE," says Dr Dieter Zetsche, Chairman of the Board of Management of Daimler AG and Head of Mercedes-Benz Cars.

"The Mercedes-AMG Project ONE is the first Formula 1 car with MOT approval. Our highly efficient hybrid assembly stems from motor racing and the electrically powered front axle generates a fascinating mixture of performance and efficiency. With a system output of over 1,000 hp and a top speed beyond 217 mph (350 km/h) this hypercar handles exactly as it looks: it takes your breath away," Ola Källenius says, Member of the Daimler AG Board of Management responsible for Group Research and Mercedes-Benz Cars Development.

The concept car gives specific indications of what to expect from the upcoming production model. "The hypercar is the most ambitious project we have every undertaken. It marks yet another pinnacle of the successful, strategic development of Mercedes-AMG towards a performance and sports car brand. Project ONE raises the bar in terms of what is currently technologically feasible and thanks to its combination of efficiency and performance it represents an absolute benchmark. At the same time, Project ONE provides an outlook on how AMG will define driving performance in the future," Tobias Moers explains as the Head of Management at Mercedes-AMG GmbH.

Powertrain: one turbocharged engine and four electric motors

The high-performance plug-in hybrid drive system of the Mercedes-AMG Project ONE comes directly from Formula 1, and was realized in close cooperation with the motorsport experts of Mercedes-AMG High Performance Powertrains in Brixworth. It consists of a highly integrated and intelligently networked unit comprising one hybrid, turbocharged combustion engine with a total of four electric motors. One has been integrated into the turbocharger, another has been installed directly on the combustion engine with a link to the crankcase and the two remaining motors drive the front wheels.

The 1.6-liter V6 hybrid gasoline engine with direct injection and electrically assisted single turbocharging comes directly from the Mercedes-AMG Petronas Formula 1 racing car. The four overhead camshafts are driven by spur gears. To achieve high engine speeds, the mechanical valve springs have been replaced by pneumatic valve springs. The vehicle is mid-engined (ahead of the rear axle) and it can easily reach speeds of 11,000 rpm, which is currently unique for a roadgoing vehicle. For higher longevity and the use of commercially available "Super Plus" gasoline instead of racing fuel, max engine speed remains significantly below the F1 engine speed limit.

The electric motors on the front axle are also true rev wonders, with rotor revolutions up to 50,000 rpm – current state of the art is a speed of 20,000 rpm.

The very high-revving engine is additionally boosted by a high-tech turbocharger. The exhaust gas and compressor turbines are separated from one another and located at an optimum position to the exhaust side and to the intake side of the V6 engine, and connected to one another by a shaft. This shaft features an electric motor with approximately 90 kW which, depending on the operating status, electrically drives the compressor turbine with up to 100,000 rpm – for instance when moving off or following load changes. The Formula 1 designation for this unit is MGU-H (Motor Generator Unit Heat).

Lightning-quick response, faster than a naturally aspirated V8 engine

The major advantage of the advanced engine: the delayed response to accelerator pedal commands owing to the inertia of the large charger, known as turbo lag, is completely eliminated. Throttle response time is greatly reduced, and is even shorter than that of a naturally aspirated V8 engine. The electric turbocharger brings about another advantage: it uses parts of the surplus energy from the exhaust system to generate electricity, and either stores it in the high-voltage lithium-ion battery as part of recuperation or provides additional drive power by feeding it to an additional electric motor. This motor produces 120 kW, has been installed directly on the engine and features a link to the crankshaft via a spur gear (MGU-K = Motor Generator Unit Kinetic) – another technology that ensures maximum efficiency and performance in Formula 1.

New all-wheel drive with purely electrically driven front axle

There are also two further 120 kW electric motors at the front axle. Each is connected to a front wheel via a reduction gear. The fully electrically driven front axle allows individual acceleration and braking of each front wheel, and therefore selective torque distribution (torque vectoring) for particularly high levels of vehicle dynamics. With the axle motors, we estimate that up to 80 percent of the braking energy can also be optimally used for recuperation under everyday driving conditions. This energy is stored in the battery and is available for a longer electric range. Each electric motor is controlled by its own power electronics located in close proximity to the electric motors in the floor assembly.

Top marks for thermal efficiency

The thermal efficiency of the combustion engine with electric turbocharger (MGU-H) in conjunction with the electric motor on the crankshaft (MGU-K) will be over 40 percent. This is a previously unattained peak value for series production vehicles, and confirms the dominant position of the drive system where efficiency is concerned. This means that the Mercedes-AMG Project ONE show car obtains significantly more drive energy from one liter of fuel than other cars. It is therefore both economical and powerful. By way of comparison, the thermodynamic efficiency of conventional series production engines is around 33 to 38 percent.

Technical data at a glance

Mercedes-AMG Project ONE show car
Rear-wheel drive
1.6-liter V6 with direct injection, four valves per cylinder, four overhead camshafts and electrically boosted single turbocharger, electric motor connected to the crankshaft
Engine capacity
1,600 cc
Rear-wheel drive output
> 500 kW
Front-wheel drive output
2 x 120 kW
System output
> 740 kW (> 1,000 hp)
Electric range
25 km
Drive system
Variable AMG Performance 4MATIC+ all-wheel drive with hybrid-drive rear axle, electrically driven front axle and torque vectoring
Transmission
Automated AMG SPEEDSHIFT 8-speed manual transmission
Acceleration 0-200 km/h
< 6 secs.
Top speed
> 350 km/h
Lithium-ion battery with Formula 1 technology

The battery cells, their arrangement and the cell cooling system are the same as used in the Mercedes-AMG Petronas Formula 1 racing car, however, the quantity of battery cells in the AMG Project ONE show car will make it significantly more practical for everyday use. The lithium-ion, high-voltage battery and the DC/DC converter supporting and charging the 12 V onboard electrical system are space-savingly accommodated in the vehicle floor behind the front axle.

As a further innovation, the high-voltage EQ Power+ drive system operates with 800 volts instead of the usual 400 volts. Thanks to the higher voltage levels it is possible to influence elements, such as significantly reducing the cable diameters and accordingly saving design space and weight.

Intelligent operating strategies for optimum output and efficiency

Overall the high-performance EQ Power+ plug-in hybrid drive system offers numerous intelligent operating strategies which are optimally tuned to different application scenarios. The driving modes range from purely electric operation through to a highly dynamic mode which corresponds to a setting used in Formula 1 qualifying for optimum lap times. Despite the high system complexity, and depending on the current requirement, the driver will always receive the optimum combination of performance and efficiency. In this process, Mercedes-AMG engineers make use of the many years of experience and know-how from Formula 1, the SLS AMG Electric Drive and Daimler AG's research and development.

For instance, the driver can move off purely electrically, initially with just the electric motors on the front axle driving the hypercar and the electric motor on the crankshaft supporting short-term acceleration wishes. If the driver presses the accelerator more firmly and demands more output, the V6 engine also switches on. The drive system unfolds its full power as the engine speed increases. Impressive acceleration figures are possible with the Race Start function: Acceleration from zero to 112 mph (200 km/h) takes under six seconds.

If the driver's foot leaves the accelerator again to let the car coast, the system switches to electric drive at the front axle – whilst braking under normal driving conditions recuperates up to 80 percent of the energy, which is fed into the battery.

Completely new, automated 8-speed manual transmission

Power is transferred to the rear wheels by an 8-speed manual transmission that has been entirely developed from scratch for the Mercedes-AMG Project ONE. It is activated hydraulically and can be operated in automated mode or manually using the shift paddles.

The basis for the outstanding driving characteristics of the Mercedes-AMG Project ONE is provided by the lightweight, high-strength carbon-fiber monocoque body, the technology of which likewise comes from Formula 1. The same applies to integration of the engine and transmission: both have load- bearing functions and completely support the rear suspension.

Multi-link suspension with innovative pushrod springing

The suspension developers also gave their utmost. Multi-link designs are used at the front and rear. The adjustable coil-over suspension has several special features: Both push-rod spring struts have been installed across the direction of travel. The innovative arrangement of the spring/damper unit replaces the function and application of conventional tubular cross members. This solution reliably prevents rolling movements even during very rapid directional changes, without being uncomfortable.

The overall setup of the springs and dampers is configured for perfectly balanced, easily controlled and above all sporty handling characteristics. These are also assisted by all-wheel drive and torque vectoring. ABS is standard equipment, with ESP® adjustable in three stages as is usual for AMG. ESP® ON stands for a high level of safety, ESP® SPORT HANDLING MODE allows greater yaw angles before system intervention for a sporty driving style, and ESP® OFF switches the system off for sporty driving on enclosed racetracks.

Exclusive forged wheels with innovative carbon-fiber semi-cover

Another completely new development is the 10-spoke forged aluminum wheel with center lock, which is exclusively reserved for the Mercedes-AMG Project ONE. This has a radial carbon-fiber semi-cover with an aerodynamically sophisticated shape: this improves the car's aerodynamics and Cd figure by optimizing the airflow around the wheels.

At the same time, three flat ventilation slots per spoke section ensure optimum heat dissipation from the brakes. This is another example of how the AMG development team pays the utmost attention to even the smallest aspects, so as to improve the efficiency of the hypercar.

At the front the Mercedes-AMG Project ONE has size 10.0 J x 19 wheels shod with 285/35 ZR 19 Michelin Pilot Sport Cup 2 tires exclusively developed for the hypercar, and at the rear 12.0 J x 20 wheels running on Michelin Pilot Sport Cup 2 335/30 ZR 20 tires.

The car is equipped with an advanced, weight-optimized ceramic high- performance compound braking system. Its low weight reduces the unsprung masses, thus improving driving dynamics and agility. Furthermore, the ceramic brakes are distinguished by a longer service life, higher corrosion resistance and higher thermal stability. The "AMG Carbon Ceramic" lettering and the specially painted brake calipers visually distinguish this unique braking system.

Exterior design: Beauty and the beast

The design of the show car is very obviously inspired by the premium class in motorsport. But above all, it embodies the Mercedes-AMG principle that fascination is always linked with function. Every part has a specific purpose. The result is a mid-engine concept, extremely muscular proportions with the cockpit well forward, large wheel arches, a wasp waist and an extended rear end.

"The Mercedes-AMG Project ONE is the hottest and coolest car we have ever designed. It combines our design philosophy of Sensual Purity with the performance of our Formula 1 racing cars and is the perfect embodiment of Performance Luxury," says Gorden Wagener, Chief Design Officer Daimler AG. "This hypercar's extreme design marks a milestone in design - there are no lines, and the interior is stripped down to the essentials."

Front view: Powerful and functional

The front view is characterized by the large front fascia, the various air inlets of which extend across the entire vehicle width. The trapezoidal center section bears a large, white AMG logo. Above it, on the vehicle body, is the Mercedes star. The hallmark AMG A-wing below the center section creates a silver- colored highlight, and seamlessly transitions into the front fenders.

On the left and right are large, prominent air inlets which are framed by U- shaped flaps and each subdivided by two black horizontal fins. Flat LED headlamps blend seamlessly into the body contours.

The black air outlets in the hood guide the hot airflow around the sides of the driver compartment. This allows the flow of fresh air to pass unhindered across the driver compartment and into the intake tract on the roof. The downforce at the front axle is positively influenced by the automatically extending front splitter and the active ventilation louvers in the front wheel arches, contributing to the perfect aerobalance of the car.

Taut flanks, large fenders

The low, dynamic greenhouse has an unmistakable, spherical architecture with a distinctive window pattern. The large, dark area stands for important technical functions. These technical components form a visual contrast to the clean overall lines of the vehicle.

The roof line is dominated by an air intake derived from Formula 1, via which the engine takes in large volumes of air. The black intake transitions elegantly into the black, vertical shark fin, which improves lateral stability when cornering at high speed. The rear window placed well to the rear is an integral part of the intake/roof-fin unit. It allows a view of the power unit. Two large NACA air inlets ensure optimum guidance of the airflows for the engine and transmission oil coolers located at the rear end.

The side view also shows a sensuous, clean surface design combined with functional features. The vehicle flanks are tautly recessed, with black carbon- fiber surfaces redirecting the airflow around the vehicle body as in motorsport.

The Petronas green paintbrush design on the flanks is the work of the artist who designed the paintwork for the Formula 1 racing car. All four wheels are spanned by tight-fitting, muscular fenders that appear ready to leap into action.

As in motor racing, the doors open both forwards and upwards. The fuel filler flap is at the rear right, the charge socket for the plug-in hybrid battery at the rear left.

Rear end: Fascination and function

The sharp, vertical spoiler lip and the large, two-section diffuser, which is interrupted by the central exhaust tailpipe, as well as the two-stage extendible rear aerofoil, contribute to aerodynamic efficiency and performance at high speeds. The design of the exhaust tailpipe with its large, round outlet and two further small, round apertures was adopted directly from the Formula 1 cars.

The muscular appearance is further enhanced by the rear fascia with its large, black mesh and carbon-fiber components. The rear lights each feature three rhomboid lighting elements to echo the graphic design of the AMG brand logo, and therefore also the design of the headlamps.

Interior: Formula 1 for two

The interior design concept of this ultimate driving machine follows function on the racetrack, and this is expressed in the radical design idiom. Formula 1 technology is made authentically tangible on both the racetrack and on the road. Here too every detail has a function, with nothing included merely for visual reasons. In the monocoque interior, the reduced components are emphasized in minimalist style both in design and functional terms.

The ergonomically contoured interior has room for two occupants. The bucket seats with adjustable backrests are integrated into the monocoque. The pedals and steering wheel are adjustable, allowing the driver to adopt the ideal driving position. The center tunnel visually separates the driver and passenger areas from each other. It blends fully into the seat sculpture and follows the principle of minimalism with its gently rising contour.

Interior with functional structural parts

The lightweight construction is also obvious from the slim, wing-like profile of the dashboard. It appears to be light and free-floating. As a functional, structural component it also makes the monocoque of the Mercedes-AMG Project ONE more rigid. The two high-resolution, free-standing 10-inch displays (one slightly raised in front of the driver, the other on the right of the center console angled towards the driver) are adapted with high-quality and weight- optimized solid metal components.

The double-nozzle ventilation unit is suspended under the center screen like a gondola. The screen and nozzles form a single unit, emphasizing the lightweight design principle of the whole. The displays' rectangular basic form is echoed by the ventilation nozzles, and by the center console in which the start/stop button is located.

Also seamlessly integrated as a unit are a high-quality stowage compartment, a reduced switch array and the engine start button. The stowage compartment is fitted with a transparent lid.

Formula 1-style steering wheel

The steering wheel with flattened upper and lower sections and an integrated airbag offers motorsport functionality, as do the two integrated controllers which can be used to set adjustment functions such as the driving modes and suspension setup, or the LED shift display in the upper steering wheel area.

The door panels are in functional, high-grade carbon-fiber, and integrate smoothly into the sporty interior. As if to mirror the aero winglets of the exterior, the door paneling is visually interrupted to create space for technical implements and a generously concave door center panel. An aluminum cassette combines the air vents and power window switches, which are integrated as deeply recessed rectangles.

Stowage compartments behind the seats, screen replaces interior mirror.

Mercedes-AMG developers have ensured suitability for everyday use and operating convenience: small items can be stowed in two compartments on the left and right behind the seats. An air conditioning system and power windows are standard equipment, while the COMAND infotainment system ensures optimum connectivity.

The user interface is integrated as an autonomous concept. The most important information is displayed on the road in the line of vision above the steering wheel, so that the driver is not distracted. To ensure optimum visibility to the rear, the rear-view mirror is replaced by a screen showing real-time images of the rear from a mirror cam. The aluminum screen housing is fully integrated into the roof, and also holds other controls.

Colors and materials from the racing car

The choice of colors and materials takes its inspiration from the Mercedes- AMG Petronas Formula 1 racing car. The sculptured racing seats are in slip- resistant black microfiber, creating an unmistakable association with motor racing. The seat surfaces are interspersed with nappa leather in magma grey and inlays in a sporty textile mesh which optimally assists the air circulation of the seats. There is also yellow contrasting topstitching.

The Mercedes-AMG Project ONE: the future of driving performance

The Mercedes-AMG Project ONE is not only an ultimate driving machine that directly brings current Formula 1 hybrid technology onto the road and combines top-class racetrack performance with full day-to-day suitability. Its purpose is also to obtain extensive findings about performance-oriented plug-in hybrid drive technology, further developments of suspension layouts and extended onboard electronics that will later benefit series production AMG cars. The Project ONE team is working hard on successfully bringing this vision onto the road.

Source: Mercedes-Benz

If you liked the article, share on:

Comments

Recommended

Soon, production-based electric cars could now race against each other on the circuits against the background of the FIA Formula E Championship, which is considered as the pinnacle of electric...
by - September 21, 2017
Honda is showcasing the retro-inspired EV concept in Germany’s 2017 Frankfurt Motor Show which will last until September 24. The retro styled city car, which is also the Japanese car...
by - September 21, 2017
During the 2017 Frankfurt Motor Show, Land Rover presented something that no other automaker has before - an off-road stroller for parents to use when transporting their toddlers. In other...
by - September 19, 2017
Around two weeks after Porsche unveiled the third generation of the Porsche Cayenne in Stuttgart, Germany, the sports car maker has taken the wraps off the turbo version of the...
by - September 18, 2017
A pickup truck that is soon celebrating its 50th birthday has the right to be invincible, especially if it has conquered various terrains and weather conditions not only in one...
by - September 18, 2017
Facebook

Youtube Channel

Tip Us
Do you have a tip for us?
Did you film an important event?
Contact us
Newsletter
Subscribe to our newsletter!
Subscribe
Galleries