2014 Geneva: Alfa Romeo 4C Spider Concept promises production version in 2015

Article by Christian A., on March 4, 2014

We already told you that Alfa Romeo will unveil the 4C Spider Concept at the 2014 Geneva Motor Show so don’t act surprised! Set to go in production in early 2015, the 4C Spider Concept was designed by the Alfa Romeo Style Centre and features the ultra-rigid construction and distinctive design of the coupe version.

Still, the open top version promises to bring the driving experience into even sharper focus as the sounds and sensations of the performances will fill the cabin. Just like any other spider version, the 4C Spider concept needed structural reinforcement required by safety regulations for open-top vehicles.

As a result, the 4C Spider Concept weighs slightly more than the Alfa Romeo 4C Coupe but thanks to the use of carbon fibre for the rollover bars, spoilers and windscreen frame, as well as the adoption of a lightweight canvas soft top and the replacement of the glass rear screen with a continuation of the SMC bodywork, the mechanical purity and low weight philosophy are not compromised.

Thanks to the use of lightweight materials, the additional weight of the open-top transformation has been limited to approximately 60 kg. The carbon fiber also dominates the interior, but not in terms of design as the monocoque of the 4C Spider Design Preview is constructed entirely from this distinctive material. This is clearly visible in the centre console, door sills and rear bulkhead.

Alfa Romeo 4C Spider Concept also introduces a new dual-stage central exhaust system with titanium and carbon tailpipes by Akrapovic.

Under the hood, we find the same four-cylinder, all-aluminium, 1750 Turbo Petrol engine used by the coupe version that delivers 240 hp and 350 Nm of torque. Performance figures are identical to the coupe version: 0 to 100 km/h (62 mph) in 4.5 seconds and a top speed in excess of 250 km/h or 155 mph.

In terms of dimensions, the Alfa Romeo 4C Spider Concept measures around four meters in length with a wheelbase of less than 2.4 meters – both highlighting its compactness and its agile nature. The concept was designed to achieve optimal aerodynamic efficiency.

In fact, it still has the downforce of the Alfa Romeo 4C coupé, allowing it to offer higher levels of stability at higher speeds. Alfa Romeo also conducted an in-depth aerodynamic study of the concept, allowing the carmaker to reduce air turbulence in the passenger compartment when the soft top is open.

Being a sibling of the 4C coupe, the 4C also employs the same high-quality materials. It is a bit heavier than its coupe sibling, due to the fact that it has to accommodate the mechanism for the soft top. Featuring the same carbon chassis, the 4C Spider is set to lead its category in terms of power/weight ratio as it comes with a total dry weight of less than 1,000 kg.

Alfa Romeo replaced the glass rear window with a continuation of the bodywork -- in SMC (Sheet Moulding Compound) – that now accommodates both the headrests and roll-bars. At a density of 1.5 g/cm3, SMC is lighter and more malleable than steel (7.8 g/cm3) and aluminum (~2.7 g/cm3).

Unlike aluminum, SMC does not deform during minor collisions. It is also resistant to chemical and atmospheric agents. Since SMC allows for a more efficient dispersal of sound, acoustic comfort is now much better on the 4C Spider.

The Alfa Romeo 4C Spider Concept is provided with a dual-stage central exhaust system concept featuring titanium and carbon tailpipes. These tailpipes -- courtesy of the Akrapovic company that makes competition exhaust systems for Enduro, Moto GP, Motocross, Superbike and Supersport – comes with electrically operated valve with wireless technology.

Press Release

Alfa Romeo 4C Spider Design Preview Debuts At 2014 Geneva Motor Show

Alfa Romeo 4C Spider “avant-prémiere” previews new soft-top scheduled to enter production in 2015
True to the philosophy of the Alfa Romeo 4C, the Spider Design Preview remains an ultra-lightweight, high-performance driving machine
Extensive use of carbon fibre and SMC*, as well as a lightweight canvas hood, ensures the Spider retains the Alfa Romeo 4C focus and purity
Stunning evolutionary design sees the addition of new headlamps, new wheels and an advanced new central exhaust system by Akropovic®
The stunning Alfa Romeo 4C Spider Design Preview makes its world début at the 2014 Geneva Motor Show, previewing a new model scheduled to go into production in early 2015. Designed by the Alfa Romeo Style Centre, the Alfa Romeo 4C Spider Design Preview takes full advantage of the ultra-rigid construction and distinctive design of the coupé to produce a Spider in the truest sense of the Alfa Romeo tradition – a car that brings the driving experience into even sharper focus by allowing the sounds and sensations of performance to fill the cabin and stir the driver’s soul still further.

Structural reinforcement required by safety regulations for open-top vehicles means that the Spider inevitably weighs slightly more than the Alfa Romeo 4C coupé, but thanks to the use of carbon fibre for the rollover bars, spoilers and windscreen frame, as well as the adoption of a lightweight canvas soft top and the replacement of the glass rear screen with a continuation of the SMC* bodywork, the 4C’s structural rigidity, mechanical purity and low weight philosophy are not compromised. As a result, the additional weight of the open-top transformation has been limited to approximately 60kg.

The purposeful stance and stunning form of the Alfa Romeo 4C Spider has been evolved to ensure the highest levels of aerodynamic efficiency and downforce, resulting in impressive high-speed stability, while at the same time minimising the open-top air turbulence in the passenger compartment.

Apart from allowing the driver to connect even more closely with their surroundings, bestowing the Spider treatment on the Alfa Romeo 4C also allows the world to get a better view of what is a truly special and unique interior. Carbon fibre dominates the cabin, but not as a decorative afterthought - the monocoque of the 4C Spider Design Preview is constructed entirely from this distinctive material and is clearly visible in the centre console, door sills and rear bulkhead, for example.

The Alfa Romeo 4C Spider Design Preview also debuts a new dual-stage central exhaust system with titanium and carbon tailpipes by Akrapovic®, a company which produces competition exhaust systems for numerous motorcycle classes including Moto GP, Superbike, Supersport, Motocross and Enduro. A key feature of the new exhaust is an electrically-operated valve system which can improve performance and enhance the exhaust note at the push of a wirelessly-linked button.

Powered by Alfa Romeo’s new four-cylinder, all-aluminium, 1750 Turbo Petrol engine, which drives the rear wheels via a six-speed, dual dry-clutch Alfa TCT transmission, the 4C Spider’s performance is all but identical to that of the hardtop Alfa Romeo 4C: 0 to 62mph takes just 4.5 seconds and top speed is in excess of 155mph. In addition, the outstanding deceleration and lateral acceleration performance, and the balanced 40:60 front-to-rear weight distribution, remain unaffected by the evolution from coupé to Spider.

Complementing its show-stopping presence, new carbon fibre clamshell headlights have been fitted to the Alfa Romeo 4C Spider Design Preview, as have new alloy wheels which have been milled from solid aluminium blocks and shod with bespoke Pirelli tyres. Finished in three-layer gloss white, which helps emphasise the car’s beautifully sculpted shape and masterfully resolved surfaces, the Alfa Romeo 4C Spider Design Preview is undoubtedly the highlight of the 2014 Geneva Motor Show.

If you liked the article, share on:

Comments

Recommended

Toyota recently published a teaser with the title “The Legend Returns.” It’s not a secret as we already know that they are referring to none other than the Toyota Supra....
by - February 16, 2018
The outgoing Mercedes-Benz C Class began production in the year 2015. And even though it may not be that old, the automaker decided to already give it a mid-cycle refresh...
by - February 16, 2018
For those of you who have extremely high standards, the Mercedes-Benz S Class may not be opulent enough for you. And this is the reason why the automaker decided to...
by - February 16, 2018
The first time you see the 2019 BMW X4 (G02), you wouldn’t notice that much of a difference compared to the outgoing model when it comes to the exterior. However,...
by - February 15, 2018
You probably are still reeling from the memory of having seen the $1.6 million Italdesign Zerouno Coupe last year. If you really wanted one and got disappointed when the coupe...
by - February 15, 2018
Facebook

Youtube Channel

Tip Us
Do you have a tip for us?
Did you film an important event?
Contact us
Newsletter
Subscribe to our newsletter!
Subscribe
Galleries