GeigerCars Chevrolet Corvette Z06 Carbon 65 Edition has more power than the ZR1

Article by Christian A., on January 11, 2018

Have you ever wanted to own a Chevrolet Corvette track car? Well, if you are, you must know that you don’t have to settle for the new ZR1 with an output of 755-horsepower (563 kilowatts). That is because German tuner GeigerCars started offering a circuit-ready variant of the Z06 Carbon 65 Edition. It definitely is a track car, because it comes with a roll cage, and a safety harness. Apart from that, it has been equipped with a supercharged 6.2 liter V8, which now makes it a little more powerful, with as much as 759 horsepower (556 kilowatts) and 729 pound-feet (989 Newton-metres) of torque.

To still keep its identity, Geiger Cars made sure that Carbon 65 Edition still keeps as much carbon fiber as it can. This is what makes it special and extra lightweight. When looking at it, the exterior comes with a new front end with a revised grille for better airflow, fender vents, tweaked side skirts, and a sub-frame with an integrated diffuser by Geiger. For the spoiler, customers can choose how they want it to be - from a subtle flat piece to a full racing setup. Overall, Geiger Cars’ treatment gave the Z06 Carbon 65 Edition a more aggressive look, without making it look too crazy.

Geiger Cars was able to boost the standard Z06’s power from 650 horsepower to 759 horsepower, as they replaced its regular 1.7 liter Eaton supercharger with a 2.3 liter screw-type unit. This has been paired with the stock transmission, which could be an eight-speed automatic or a seven-speed manual. The throttle, intake and engine software had all been tweaked as well. The upgraded model can now reach 62 miles per hour (100 kilometers per hour) in 2.9 seconds, while reaching a max speed of 209 miles per hour (337 kilometers per hour). That is pretty good when compared to Chevy’s own ZL1.

As mentioned earlier, the cabin gets a new Heigo roll bar, together with four-point racing harnesses. The tuner expects their buyers to take this car to the track, which is why all these upgrades are being offered.

For those of you who are interested in what Geiger Cars has to offer, you don’t necessarily have to get the whole package, but instead, you may get these upgrades individually. The costs are the following: the bodykit (9,600 euros), engine upgrade (12,900 euros), cooling system (15,500 euros), suspension revisions (4,290 euros), HRE wheels (7,400 euros), roll bar and racing harness (2,600 euros and 1,099 euros).

If you add all these up, that will be 53,389 euros for the upgrades alone. But you could also opt for a brand new Z06 Carbon 65 Edition for 136,000 euros, which includes a short driving course at the Green Hell.

Press Release

Corvette Z06 Geiger Carbon 65 Edition

To mark the 65th anniversary of the Corvette, the fathers of this iconic American sports car have brought out a special, limited-edition model based on the Grand Sport and Z06 models. In line with the anniversary, only 650 specimens of the “Carbon 65 Edition” will be shipped, already equipped with a sumptuous carbon fiber package at the factory. This includes a hood with visible carbon fiber, as well as side skirts, a targa top, a rear spoiler, and air intakes, all with visible carbon fiber, carbon flash emblems, and a carbon fiber interior, including running boards with Carbon 65 lettering.

The Munich-based American car specialists at have taken up the carbon fiber spirit of this special model and used it as a basis for their Corvette Z06 Geiger Carbon 65 Edition. This in-house interpretation of the special edition not only takes the presence of the characteristically irides- cent material to extremes with a body kit featuring extensive use of visible carbon fiber, but also significantly enhances the car’s performance!

- Spectacular body kit with visible carbon fiber
- Power upgrade to 566 kW / 770 HP and 989 Nm
- Accelerates from 0-100 km/h in 2.9 sec. / Vmax 337 km/h

The Geiger visible carbon fiber aerodynamics kit includes a front spoiler for the car’s typically aggressive nose, a front grille to enhance the passage of air, as well as air intakes in the front mask. The flanks sport new side skirts, as well as race car engine compartment vents on the fenders, while the Corvette rear end is designed to look even more massive by adding a Geiger sub-frame with a diffuser. To supplement the two alternative rear spoilers intended for road use (flat for more top speed or at a steeper angle for greater contact pressure), you can also choose a purebred racing spoiler.

The GeigerCars engineers replace the factory-installed 1.7-liter Eaton compressor on the Corvette Z06 with a more powerful 2.3-liter screw compressor, which elicits a power upgrade to 566 kW / 770 HP at 6,500 rpm and a maximum torque of 989 Nm at 3,350 rpm when combined with modifications on the throttle valve and the intake system followed by a final software optimization.

Thus strengthened, the Geiger Carbon 65 Edition Corvette Z06 bursts through the 100 km/h barrier in only 2.9 seconds and shoots to a top speed of 337 km/h.

The “Trackday Racer” cooling system package from GeigerCars, which includes modified charge air, cooling water and oil cooler systems, optimizes both the efficiency of the supercharger as well as the equipment temperatures.
On the axles, GeigerCars attaches 10.5x19 and 12.5x20 inch light metal wheels from the product range of the American high-end label HRE Performance Wheels. For the treads on these forged one-piece wheels, there is an option of standard 285/30R19 Michelin Pilot Super Sport rubber on the steering axle and 335/25R20 on the drive axle, or Michelin Pilot Sport Cup 2 sport tires in the same sizes for an even better grip on the road.

By using a modified knuckle to lower the suspension setting, GeigerCars not only gives the carbon fiber racer an aggressively crouching look, but also optimizes its driving dynamics without diminishing the riding comfort of the standard vehicle.

While the standard Corvette Z06 Carbon 65 Edition not only comes with the option of an eight-speed automatic transmission or a seven-speed gearshift, but can also be equipped with ceramic brakes in place of the conventional steel brakes, GeigerCars also offers an upgrade to an even more powerful, more efficient brake system.

GeigerCars also upgrades the cockpit in keeping with the racetrack character of the Corvette Z06 Geiger Carbon 65 Edition bullet. For instance, the bucket seats are surrounded by a Heigo roll bar and combined with Schroth four-point belts, which keeps passengers safely in place even at extreme g-forces.

The standard Corvette Z06 Carbon 65 Edition is available from GeigerCars at a basic price of € 136,000. The prices for the modifications are € 9,600 for the carbon fiber body kit, € 12,900 for the performance enhancement, and
€ 15,500 for the Trackday Racer cooling system, as well as € 4,290 for the lowered suspension and € 7,400 for the set of HRE wheels. The Heigo roll bar comes to € 2,600 and the Schroth safety belts cost € 1,099 (all prices include installation and sales tax).

Special highlight: Anyone who buys a Corvette Z06 Geiger Carbon 65 Edition can expect a free, two-day perfection training on the world’s most demanding racetrack: the Nürburgring’s Nordschleife.

Specifications, Corvette Z06 Geiger Carbon 65 Edition

Engine: V8 engine with supercharger
Displacement: 6,162 cc
Power: 566 kW / 770 HP at 6,500 rpm
Torque: 989 Nm at 3,350 rpm
Transmission: 8-speed automatic
FuelConsumption: Urban/highway/combined:19,1/7,8/12.0L/100km(Super) Acceleration 0-100 km/h: 2.9 sec.

Maximum speed: 337 km/h
Co2 emissions, combined: 278 g/km
Energy efficiency class: G
Emission class: Euro 6
Basic vehicle price: € 136,000 plus conversion* customizing

Geiger visible carbon fiber body kit, consisting of front spoiler,
front grille, air intakes, front mask, side skirts, fender engine
compartment vents, rear-end sub-frame with diffuser, rear
spoiler (flat/steep) or rear-end racing spoiler as an option € 9,600*

Performance enhancement
(2.3 L compressor, modified throttle valve, modified intake
system, software tuning, performance measurement) € 12,900*

“Trackday Racer” cooling system
(modified charge air, cooling water and oil cooler systems) € 15,500*

Lowered suspension setting (with knuckles) € 4,290*

HRE light metal wheels (front 10.5x19 inch/rear 12.5x20 inch) € 7.400*

Heigo roll bar € 2,600*

Schroth four-point belts € 1,099*

(*) all prices include installation and 19% sales tax

Source: GeigerCars

If you liked the article, share on:



The Acura NSX, even though it has been produced in the United States, is rightfully claimed as one of its own by the legions of fans in Japan, where it...
by - February 21, 2018
Since the Audi SQ5 first came out, Bavarian tuner did nothing but think up different scenarios for this hot crossover. ABT Sportsline has been offering various upgrade packages for the...
by - February 19, 2018
British automaker McLaren developed their MSO (McLaren Special Operations) division to make their already exclusive vehicles a little more bespoke. And today, we are going to discuss some of their...
by - February 15, 2018
Today, the most powerful Mercedes-Benz model you could get is probably the twelve-cylinder S65 and Maybach S650 – as both models have an output of 621 horsepower. However, VATH decided...
by - February 5, 2018
Are you one of those people whose favourite colour is black? If you are, then you will definitely love this murdered out BMW X5 M example here. And by the...
by - February 2, 2018

Youtube Channel

Tip Us
Do you have a tip for us?
Did you film an important event?
Contact us
Subscribe to our newsletter!